![](/images/new-backgrounds/1223111/223111125x1.webp)
Options/Accessories
7
8 seismic angles
6.2.1 Mounting Seismic Anchoring
Drill 16 holes for Ø10mm bolts at installation site according to dimensioned sketch.
With the holes drilled in the UPS, position the system correctly and slide the 8 seismic anchoring angles into the bars (see illustration above). Tighten the angles in the holes, using bolts and plain washers.
NOTICE!
Tighten all bolts in all 8 angles to the floor. Floor bolts not supplied
Installation Guide APC Silcon | 63 |