English
All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of Seiko Epson Corporation. No patent liability is assumed with respect to the use of the information contained herein. While every precaution has been taken in the preparation of this book, Seiko Epson Corporation assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained herein.
Neither Seiko Epson Corporation nor its affiliates shall be liable to the purchaser of this product or third parties for damages, losses, costs, or expenses incurred by purchaser or third parties as a result of: accident, misuse, or abuse of this product or unauthorized modifications, repairs, or alterations to this product, or (excluding the U.S.) failure to strictly comply with Seiko Epson Corporation’s operating and maintenance instructions.
Seiko Epson Corporation shall not be liable against any damages or problems arising from the use of any options or any consumable products other than those designated as Original Epson Products or Epson Approved Products by Seiko Epson Corporation.
EPSON and ESC/POS are registered trademarks of Seiko Epson Corporation. NOTICE: The contents of this manual are subject to change without notice.
Copyright © 2004 by Seiko Epson Corporation, Nagano, Japan.
EMC and Safety Standards Applied
Product Name:
Model Name: M66SA/M117A
The following standards are applied only to the printers that are so labeled. (EMC is tested using the EPSON power supplies.)
Europe: | CE marking |
| Safety: EN 60950 |
North America: EMI:
Japan: | EMC: | VCCI Class A |
Oceania: | EMC: | AS/NZS 3548, CISPR Class B |
CE Marking
The printer conforms to the following Directives and Norms:
Directive 89/336/EEC | EN 55022 Class B |
| EN 55024 |
| IEC |
| IEC |
| IEC |
| IEC |
| IEC |
| IEC |
Directive 90/384/EEC | EN 45501 |
WARNING
The connection of a
Safety Precautions
FCC Compliance Statement For American Users
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at his own expense.
For Canadian Users
This Class A digital apparatus complies with Canadian
This section presents important information intended to ensure safe and effective use of this product. Please read this section carefully and store it in an accessible location.