Canon LR1 Cleaning the Print Head, Normal Print Head Cleaning, Make sure the printer is turned on

Page 25

Cleaning the Print Head

The LR1 is equipped with two print head cleaning functions: normal print head cleaning and a more powerful deep print head cleaning.

Only execute deep print head cleaning when the print quality does not improve after executing normal print head cleaning.

Perform print head cleaning only when necessary; unnecessary and repetitious print head cleaning wastes ink. Deep print head cleaning consumes a particularly large amount of ink.

Normal Print Head Cleaning

Make sure the printer is turned on.

The green POWER light is on.

Press and hold the RESUME/CLEAN button until you hear two beeps, then release the button.

Cleaning begins. The BUSY light flashes during cleaning. When cleaning is finished, the BUSY light goes out.

Print a Nozzle Check Pattern (see page 2-2).

If broken lines appear, repeat the above operation two or three times. If broken lines still appear in the Nozzle Check Pattern, execute deep print head cleaning.

2-4

Using BJ Cartridges Chapter 2

Image 25
Contents LR1 Page Disclaimer CopyrightTrademarks Quick Start Guide Using Your DocumentationQuick Guide to Printing User’s Manual this guideConventions Contents FCC-1 Introduction Choosing a Place for Your Printer Important Notes on SafetyDo not place the printer on thick rugs or carpets Supplying Power to the Printer Printer is designed for use with AC 120 Do not use the power cord if it is tied or knottedDo not use items such as flammable sprays near the printer Handling the PrinterDo not disassemble or alter the printer in any way Handling the BJ Cartridge Maintaining the PrinterDo not drop or shake BJ cartridges Paper Supplies and AccessoriesBJ Cartridges BC-10 Black BJ Cartridge Ink Tanks BC-11e Color BJ CartridgeBC-12e Photo BJ Cartridge Ink Cartridge Storage BoxFront View Names and Functions of the Printer’s PartsControl Panel Back ViewTurning On the Power Turning the Power On and OffAuto power on/off function Confirm that the connected Internet device is turned offPress the printer’s Power button Turning the Power OffGetting Help From Canon Servicing the Printer You can use the following BJ cartridges with the LR1 Using BJ CartridgesPrinting the Nozzle Check Pattern If Printing Is Unclear or Colors Are MissingMake sure paper is loaded in the paper supply tray Normal Nozzle Check Pattern looks like this Normal Print Head Cleaning Cleaning the Print HeadMake sure the printer is turned on Print a Nozzle Check Pattern seeDeep Print Head Cleaning Replacing Ink Tanks Ink Type and Ink ReplacementImportant Notes Remove the ink tank Replacing an Ink TankFor the BC-11e Color BJ Cartridge Replacing an Ink Tank For the BC-12e Photo BJ Cartridge For the BC-10 Black BJ CartridgeInstall the new ink tank Color ink tank Press the ink light reset button Replacing the BJ Cartridge Close the BJ cartridge access coverRelease and raise the green tab with your finger Remove the BJ cartridgeInstall the BJ cartridge Prepare the replacement BJ cartridgeClose the BJ cartridge access cover Using BJ Cartridges Chapter Paper Handling High Resolution PaperPlain Paper Important Notes on Paper Loading the Paper Supply Tray Loading PaperPull the paper supply tray all the way out Fan the paper to be loaded and align the four cornersPush the tray all the way into the printer Set the paper guide and size guideInsert the paper Loading Single Sheets in the Manual Feed SlotAlign the paper guide with the left edge of the paper Using High Resolution PaperOpen the back cover Pull out the paper supply tray Close the back cover and press the RESUME/CLEAN button againClearing Paper Jams Maintaining the Printer Printer MaintenanceCleaning the Printer Transporting the Printer Turn off the power to the Internet device and the printerMaintaining the Printer Chapter Power TroubleshootingPower does not go on Light above the Power button comes onTroubleshooting Chapter LOW INK light comes on Paper Trouble When PrintingPaper is jammed Paper does not feed properlyBefore loading? Was the paper fannedIs too much paper Loaded?Back side of the paper is soiled Paper Trouble After PrintingPrinted side of the paper is soiled Paper curls after printingIf the printer does not print or stops during printing Trouble When PrintingPrinting starts, but stops before it is finished Printer is printing garbagePrinting has a scratched appearance Printing is unclearIs the paper too thick? Is the paper bent or curled? Ink bleeds White lines appearIs ink flowing properly Colors are wrongFrom the BJ cartridge? Correctly installed? Cartridge does not move into the replacement positionIs the power on? Lines do not print straightTroubleshooting Chapter Specifications Paper Size Recommended Printing Area area Specifications Appendix a Automatic feed GlossaryRAM Index Index USB Canadian Radio Interference Regulations FCC RegulationsColor Bubble Jet Printer, Model K10191