Canon LR1 user manual Replacing an Ink Tank

Page 30

Replacing an Ink Tank

Make sure the LR1 is turned on.

Do not turn off or unplug the printer while replacing an ink tank. Doing so may cause damage to the BJ cartridge.

Press the access cover release button and open the BJ cartridge access cover.

The BJ cartridge automatically moves to the center.

BJ cartridge access cover

Do not touch this cable

➜

Remove the ink tank.

■Do not remove the green print head unit when replacing ink tanks.

■When disposing of used ink tanks, follow local regulations for disposal.

For the BC-11e Color BJ Cartridge

■Black ink tank — Raise the gray tab by lifting it with your finger.

BCI-11 Black

BCI-18 Black (high capacity tank)

2-8	Using BJ Cartridges Chapter 2

Image 30

Contents LR1 Page Copyright DisclaimerTrademarks Quick Guide to Printing Using Your DocumentationQuick Start Guide User’s Manual this guideConventions Contents FCC-1 Introduction Important Notes on Safety Choosing a Place for Your PrinterDo not place the printer on thick rugs or carpets Supplying Power to the Printer Do not use the power cord if it is tied or knotted Printer is designed for use with AC 120Handling the Printer Do not use items such as flammable sprays near the printerDo not disassemble or alter the printer in any way Maintaining the Printer Handling the BJ CartridgeDo not drop or shake BJ cartridges Supplies and Accessories PaperBJ Cartridges BC-12e Photo BJ Cartridge Ink Tanks BC-11e Color BJ CartridgeBC-10 Black BJ Cartridge Ink Cartridge Storage BoxNames and Functions of the Printer’s Parts Front ViewBack View Control PanelAuto power on/off function Turning the Power On and OffTurning On the Power Confirm that the connected Internet device is turned offTurning the Power Off Press the printer’s Power buttonGetting Help From Canon Servicing the Printer Using BJ Cartridges You can use the following BJ cartridges with the LR1If Printing Is Unclear or Colors Are Missing Printing the Nozzle Check PatternMake sure paper is loaded in the paper supply tray Normal Nozzle Check Pattern looks like this Make sure the printer is turned on Cleaning the Print HeadNormal Print Head Cleaning Print a Nozzle Check Pattern seeDeep Print Head Cleaning Ink Type and Ink Replacement Replacing Ink TanksImportant Notes Replacing an Ink Tank Remove the ink tankFor the BC-11e Color BJ Cartridge Replacing an Ink Tank For the BC-10 Black BJ Cartridge For the BC-12e Photo BJ CartridgeInstall the new ink tank Color ink tank Press the ink light reset button Close the BJ cartridge access cover Replacing the BJ CartridgeRemove the BJ cartridge Release and raise the green tab with your fingerPrepare the replacement BJ cartridge Install the BJ cartridgeClose the BJ cartridge access cover Using BJ Cartridges Chapter High Resolution Paper Paper HandlingPlain Paper Important Notes on Paper Pull the paper supply tray all the way out Loading PaperLoading the Paper Supply Tray Fan the paper to be loaded and align the four cornersSet the paper guide and size guide Push the tray all the way into the printerLoading Single Sheets in the Manual Feed Slot Insert the paperUsing High Resolution Paper Align the paper guide with the left edge of the paperOpen the back cover Close the back cover and press the RESUME/CLEAN button again Pull out the paper supply trayClearing Paper Jams Printer Maintenance Maintaining the PrinterCleaning the Printer Turn off the power to the Internet device and the printer Transporting the PrinterMaintaining the Printer Chapter Power does not go on TroubleshootingPower Light above the Power button comes onTroubleshooting Chapter Paper is jammed Paper Trouble When PrintingLOW INK light comes on Paper does not feed properlyIs too much paper Was the paper fannedBefore loading? Loaded?Printed side of the paper is soiled Paper Trouble After PrintingBack side of the paper is soiled Paper curls after printingTrouble When Printing If the printer does not print or stops during printingPrinter is printing garbage Printing starts, but stops before it is finishedPrinting is unclear Printing has a scratched appearanceIs the paper too thick? Is the paper bent or curled? White lines appear Ink bleedsColors are wrong Is ink flowing properlyFrom the BJ cartridge? Is the power on? Cartridge does not move into the replacement positionCorrectly installed? Lines do not print straightTroubleshooting Chapter Specifications Paper Size Recommended Printing Area area Specifications Appendix a Glossary Automatic feedRAM Index Index USB FCC Regulations Canadian Radio Interference RegulationsColor Bubble Jet Printer, Model K10191