Canon LR1 Printer is printing garbage, Printing starts, but stops before it is finished

Page 58

The last part of the document does not print

Is the printer properly connected to the Internet device?

Firmly connect the power cord and the printer cable.

Printing starts, but stops before it is finished

Does the document involve a large amount of data, such as photos and illustrations?

Has the printer been printing for an extended period of time?

When printing documents that involve a large amount of data, it may take several moments before printing starts. If the BUSY light is green, print data is being sent to the printer. Wait for printing to start.

If you print for extended periods of time, the BJ cartridge overheats and the RESUME/CLEAN light flashes. If this happens, stop printing and wait until the BJ cartridge has cooled. When the BJ cartridge is cool, the light stops flashing.

The printer is printing garbage

Was the previous printing job cancelled while it was still printing?

Is the printer properly connected to the Internet device?

Is the data printout correct?

Data from the previously printed job may be left in the printer’s memory. Turn off the power to the printer and the Internet device, then turn the power on again.

Firmly connect the power cord and the printer cable.

If unreadable characters are printed only when printing certain data, there may be a problem with the data or the application software. Re-create the data and print again. If the problem persists, call the Canon Customer Care Center (see page 1-13).

Troubleshooting

Chapter 5 Troubleshooting

5-7

Image 58

Contents LR1 Page Disclaimer CopyrightTrademarks Quick Guide to Printing Using Your DocumentationQuick Start Guide User’s Manual this guideConventions Contents FCC-1 Introduction Choosing a Place for Your Printer Important Notes on SafetyDo not place the printer on thick rugs or carpets Supplying Power to the Printer Do not use the power cord if it is tied or knotted Printer is designed for use with AC 120Do not use items such as flammable sprays near the printer Handling the PrinterDo not disassemble or alter the printer in any way Handling the BJ Cartridge Maintaining the PrinterDo not drop or shake BJ cartridges Paper Supplies and AccessoriesBJ Cartridges BC-12e Photo BJ Cartridge Ink Tanks BC-11e Color BJ CartridgeBC-10 Black BJ Cartridge Ink Cartridge Storage BoxNames and Functions of the Printer’s Parts Front ViewBack View Control PanelAuto power on/off function Turning the Power On and OffTurning On the Power Confirm that the connected Internet device is turned offTurning the Power Off Press the printer’s Power buttonGetting Help From Canon Servicing the Printer Using BJ Cartridges You can use the following BJ cartridges with the LR1Printing the Nozzle Check Pattern If Printing Is Unclear or Colors Are MissingMake sure paper is loaded in the paper supply tray Normal Nozzle Check Pattern looks like this Make sure the printer is turned on Cleaning the Print HeadNormal Print Head Cleaning Print a Nozzle Check Pattern seeDeep Print Head Cleaning Ink Type and Ink Replacement Replacing Ink TanksImportant Notes Remove the ink tank Replacing an Ink TankFor the BC-11e Color BJ Cartridge Replacing an Ink Tank For the BC-10 Black BJ Cartridge For the BC-12e Photo BJ CartridgeInstall the new ink tank Color ink tank Press the ink light reset button Close the BJ cartridge access cover Replacing the BJ CartridgeRemove the BJ cartridge Release and raise the green tab with your fingerPrepare the replacement BJ cartridge Install the BJ cartridgeClose the BJ cartridge access cover Using BJ Cartridges Chapter Paper Handling High Resolution PaperPlain Paper Important Notes on Paper Pull the paper supply tray all the way out Loading PaperLoading the Paper Supply Tray Fan the paper to be loaded and align the four cornersSet the paper guide and size guide Push the tray all the way into the printerLoading Single Sheets in the Manual Feed Slot Insert the paperAlign the paper guide with the left edge of the paper Using High Resolution PaperOpen the back cover Close the back cover and press the RESUME/CLEAN button again Pull out the paper supply trayClearing Paper Jams Printer Maintenance Maintaining the PrinterCleaning the Printer Turn off the power to the Internet device and the printer Transporting the PrinterMaintaining the Printer Chapter Power does not go on TroubleshootingPower Light above the Power button comes onTroubleshooting Chapter Paper is jammed Paper Trouble When PrintingLOW INK light comes on Paper does not feed properlyIs too much paper Was the paper fannedBefore loading? Loaded?Printed side of the paper is soiled Paper Trouble After PrintingBack side of the paper is soiled Paper curls after printingTrouble When Printing If the printer does not print or stops during printingPrinter is printing garbage Printing starts, but stops before it is finishedPrinting has a scratched appearance Printing is unclearIs the paper too thick? Is the paper bent or curled? White lines appear Ink bleedsIs ink flowing properly Colors are wrongFrom the BJ cartridge? Is the power on? Cartridge does not move into the replacement positionCorrectly installed? Lines do not print straightTroubleshooting Chapter Specifications Paper Size Recommended Printing Area area Specifications Appendix a Glossary Automatic feedRAM Index Index USB Canadian Radio Interference Regulations FCC RegulationsColor Bubble Jet Printer, Model K10191