Canon LR1 user manual Troubleshooting Chapter

Page 53

Light

Number of Beeps Printer Condition and Status/Solution

—Normal (setup or cleaning is in process). Wait until the flashing light goes out.

The BJ cartridge access cover is open. Close the BJ cartridge access cover. When replacing BJ cartridges and ink tanks, close the access cover after you have finished replacement, then wait until the flashing light goes out.

—Normal (receiving print data). Wait for printing to begin.

1	Paper is not loaded correctly.
	Check the feed areas and reload the paper
	(see page 3-3).
2	Paper is jammed.
	Remove the jammed paper (see page 3-8).
3	The BJ cartridge is not inserted correctly.
	Remove the BJ cartridge and reinsert it
	(see page 2-14).
4	The BJ cartridge is overheated.
	Stop printing and wait until the BJ cartridge
	cools. When the cartridge cools, the light
	stops flashing.

—	A serious error has occurred.
	Turn off the power, wait approximately 15
	seconds, and then turn it back on. If the
	lights continue flashing, contact the Canon
	Customer Care Center (see page 1-13).

5-2	Troubleshooting Chapter 5

Image 53

Contents LR1 Page Trademarks CopyrightDisclaimer Quick Start Guide Using Your DocumentationQuick Guide to Printing User’s Manual this guideConventions Contents FCC-1 Introduction Do not place the printer on thick rugs or carpets Important Notes on SafetyChoosing a Place for Your Printer Supplying Power to the Printer Printer is designed for use with AC 120 Do not use the power cord if it is tied or knottedDo not disassemble or alter the printer in any way Handling the PrinterDo not use items such as flammable sprays near the printer Do not drop or shake BJ cartridges Maintaining the PrinterHandling the BJ Cartridge BJ Cartridges Supplies and AccessoriesPaper BC-10 Black BJ Cartridge Ink Tanks BC-11e Color BJ CartridgeBC-12e Photo BJ Cartridge Ink Cartridge Storage BoxFront View Names and Functions of the Printer’s PartsControl Panel Back ViewTurning On the Power Turning the Power On and OffAuto power on/off function Confirm that the connected Internet device is turned offPress the printer’s Power button Turning the Power OffGetting Help From Canon Servicing the Printer You can use the following BJ cartridges with the LR1 Using BJ CartridgesMake sure paper is loaded in the paper supply tray If Printing Is Unclear or Colors Are MissingPrinting the Nozzle Check Pattern Normal Nozzle Check Pattern looks like this Normal Print Head Cleaning Cleaning the Print HeadMake sure the printer is turned on Print a Nozzle Check Pattern seeDeep Print Head Cleaning Replacing Ink Tanks Ink Type and Ink ReplacementImportant Notes For the BC-11e Color BJ Cartridge Replacing an Ink TankRemove the ink tank Replacing an Ink Tank For the BC-12e Photo BJ Cartridge For the BC-10 Black BJ CartridgeInstall the new ink tank Color ink tank Press the ink light reset button Replacing the BJ Cartridge Close the BJ cartridge access coverRelease and raise the green tab with your finger Remove the BJ cartridgeInstall the BJ cartridge Prepare the replacement BJ cartridgeClose the BJ cartridge access cover Using BJ Cartridges Chapter Plain Paper High Resolution PaperPaper Handling Important Notes on Paper Loading the Paper Supply Tray Loading PaperPull the paper supply tray all the way out Fan the paper to be loaded and align the four cornersPush the tray all the way into the printer Set the paper guide and size guideInsert the paper Loading Single Sheets in the Manual Feed SlotOpen the back cover Using High Resolution PaperAlign the paper guide with the left edge of the paper Pull out the paper supply tray Close the back cover and press the RESUME/CLEAN button againClearing Paper Jams Maintaining the Printer Printer MaintenanceCleaning the Printer Transporting the Printer Turn off the power to the Internet device and the printerMaintaining the Printer Chapter Power TroubleshootingPower does not go on Light above the Power button comes onTroubleshooting Chapter LOW INK light comes on Paper Trouble When PrintingPaper is jammed Paper does not feed properlyBefore loading? Was the paper fannedIs too much paper Loaded?Back side of the paper is soiled Paper Trouble After PrintingPrinted side of the paper is soiled Paper curls after printingIf the printer does not print or stops during printing Trouble When PrintingPrinting starts, but stops before it is finished Printer is printing garbageIs the paper too thick? Is the paper bent or curled? Printing is unclearPrinting has a scratched appearance Ink bleeds White lines appearFrom the BJ cartridge? Colors are wrongIs ink flowing properly Correctly installed? Cartridge does not move into the replacement positionIs the power on? Lines do not print straightTroubleshooting Chapter Specifications Paper Size Recommended Printing Area area Specifications Appendix a Automatic feed GlossaryRAM Index Index USB Color Bubble Jet Printer, Model K10191 FCC RegulationsCanadian Radio Interference Regulations