Toshiba RKP004Z Using an Easy key function, To change the frequency during operation

Page 17

5. Operation in Top View Mode

2 After selecting the position of a figure you want to change, specify/confirm another figure with the control dial.

(In this example, a frequency of 30.0Hz is specified.)

Functions of function keys

The functions keys allow you to select the position or decimal place of each figure (operation frequency) you want to increment or decrement with the control dial.

F1 : Selects the position of hundreds.

F2 : Selects the position of tens.

F3 : Selects the position of ones.

F4 : Selects the first decimal place.

Basic Parameters

FC

Panel frequency

Output frequency			0.0Hz
	30.0Hz
min=0.0			max=60.0
×1000	×100	×10	×1
F1	F2	F3	F4

When you confirm the frequency specified, the screen goes back to the top window of Top View Mode.

To change the frequency during operation

Press the control dial during operation to display the operation panel operation frequency menu and turn the control dial to change the setting.

5.2 Using an EASY key function

The [F1] function key can be used as a substitute for the EASY key on the inverter’s main operation panel. When the name of the function assigned to the [F1] key is displayed in the lower left corner of the window, the [F1] key can be used as the EASY key.

“Quick”	: Function of switching between Quick
	mode and Standard Setting mode
	(parameter F750=0)
“Panel”	: Function of switching between Operation
	Panel and Remote
	(parameter F750=2)
	(When used with a VF-AS1 inverter)

“Loc/Rem” : Function of switching between Local and Remote

(parameter F750=2)

(When used with a VF-PS1 inverter) “Update” : Function of updating the Peak/Minimum

Hold setting (parameter F750=3)

*The shortcut key function (parameter F750=1) cannot be used. Even if the parameter is so set, the name of the function is not displayed on the screen.

Top View Mode

FWD	60.0 Hz	STOP
		0.0 Hz

Quick	Lng	---

Quick

Panel (When used with a VF-AS1 inverter)

Loc/Rem (When used with a VF-PS1 inverter)

5-2

Image 17

Contents LCD Remote Keypad „ Check product purchase Introduction„ Explanation of model code Model number Introduction „ Optional products„ Limitation of use Safetyprecautionsprecautions Explanation of markings„ Transportation and installation Safety precautions „ Handling in general„ Notes on operations Safety precautions „ Operations„ Disposal Contents Names. Namesand functionsand functions „ LCD panel Names and functionsNames and functions „ About the change of parameter settings Installing the remote keypad to the inverter Installing the LCD remote keypad Installing the remote keypad to the board optionalRemote keypad Remote control optionalInverter unit インバータ⇒パネル Language Selection window appears on the screenParameter Setup Mode Top View ModeStatus Monitor Mode 54. .標About準モニタモードavailable modesSetting a panel operation frequency Operation. in Top View Modein Top View Mode„ Explanation of the top window Functions of function keys„ To change the frequency during operation Using an Easy key functionAlways Quick mode parameter PSEL=2 Operation in Top View ModeOperation Panel and Remote When used with a VF-AS1 inverter Operation Panel and Remote When used with a VF-PS1 inverterSelecting a language to be displayed Operation in Top View Mode Peak/Minimum Hold settingPress the F2 Lng key Select/confirm the desired language with the control dialPress the F4 key to carry out jog run Performing jog run60.0 Hz Emergency stop/reset operation„ When Quick mode is selected Operation. in Parameter inSetupParameterModeSetup ModeSelect/confirm History function using the control dial „ In this window, settings can be changedSelect/confirm Basic parameters using the control dial Setting a basic parameterOperation in Parameter Setup Mode Change the parameter setting Setting an extended parameterSelect/confirm Extended parameters using the control dial ［CMOd］ Select/confirm Changed Parameters using the control dialItems displayed Description Display Operation. in Status Monintor modeStatus Monitor ModeDisplaying details of an item monitored VFAS1 VFPS1 Operation. Operationby copy functionin a copy functionOperation by a copy function Copy to LCDDisplay of copy loading（fixed screen） Display of copy finish［Copy to the inverter］ Copy to inverterConfirm a memory information Function Reference WarrantyList of function key functionsFunction Key Display Position „ Outside dimensions unit mm 710. 状態. モSpecificationsニタモードでの操作Specifications Problems Possible causes Remedies Before. Beforemaking a servicemakingcall a service callBefore making a service call Warranty. Warranty