Toshiba RKP004Z instruction manual Copy to inverter, ［Copy to the inverter］

Page 30

8.Operation by a copy function

8.2 Copy to inverter

There is no data in LCD, and copy it to LCD at the time of purchase. (Chap.: 8.1)

Push the F3 key on an initial screen and the copy mode screen is displayed. It is not possible to drive with the [RUN] key in the following 3～5 screen display.

1 Select the memory saving group using the control dial.

2 Select copy direction [Copy to the inverter memory] using the control dial.

It is not possible to copy to the inverter when there is no information in the selected memory. Copy to the LCD first

(ref.: Chapter 8.1).

3 Display of copy waiting

Copy starts when the [F4] key is input

4 Display of copy loading（fixed screen）

Copy finishes in 1 minute. . When the copy is not completed even if it waits 2 minutes or more, please reset a power supply and copy again.

Copy Mode

Group selection

Memory - A

Memory - B

TopInfo

Copy Mode

Memory - A

Group selection

［Copy to the inverter］

［Copy to the LCD memory］

Top

Copy Mode

Memory - A

［Copy to the inverter］

Waiting

Please push F4 key when starting

TopStart

F4

Copy Mode

Memory - A

［Copy to the inverter］

5 Display of copy finish

Return to the copy direction window as above “2” when press the ESC key after copy.

.

Copy Mode

Memory - A

［Copy to the inverter］

Finish

Copy was completed normally. Please push ESC-key.

CRC code：6AE3

Top

8-3

Image 30

Contents LCD Remote Keypad Introduction „ Explanation of model code„ Check product purchase Introduction „ Optional products Model numberSafetyprecautionsprecautions Explanation of markings „ Limitation of useSafety precautions „ Handling in general „ Transportation and installationSafety precautions „ Operations „ Disposal„ Notes on operations Contents Names. Namesand functionsand functions Names and functions „ LCD panelNames and functions „ About the change of parameter settings Installing the remote keypad to the inverter Installing the remote keypad to the board optional Installing the LCD remote keypadRemote control optional Inverter unitRemote keypad Language Selection window appears on the screen インバータ⇒パネルStatus Monitor Mode Top View ModeParameter Setup Mode 54. .標About準モニタモードavailable modes„ Explanation of the top window Operation. in Top View Modein Top View ModeSetting a panel operation frequency Functions of function keysUsing an Easy key function „ To change the frequency during operationOperation Panel and Remote When used with a VF-AS1 inverter Operation in Top View ModeAlways Quick mode parameter PSEL=2 Operation Panel and Remote When used with a VF-PS1 inverterPress the F2 Lng key Operation in Top View Mode Peak/Minimum Hold settingSelecting a language to be displayed Select/confirm the desired language with the control dialPerforming jog run Press the F4 key to carry out jog runEmergency stop/reset operation 60.0 HzSelect/confirm History function using the control dial Operation. in Parameter inSetupParameterModeSetup Mode„ When Quick mode is selected „ In this window, settings can be changedSetting a basic parameter Operation in Parameter Setup ModeSelect/confirm Basic parameters using the control dial Setting an extended parameter Select/confirm Extended parameters using the control dialChange the parameter setting Select/confirm Changed Parameters using the control dial ［CMOd］Operation. in Status Monintor modeStatus Monitor Mode Items displayed Description Display Displaying details of an item monitored Operation. Operationby copy functionin a copy function VFAS1 VFPS1Display of copy loading（fixed screen） Copy to LCDOperation by a copy function Display of copy finishCopy to inverter ［Copy to the inverter］Confirm a memory information WarrantyList of function key functions Function Key Display PositionFunction Reference 710. 状態. モSpecificationsニタモードでの操作 Specifications„ Outside dimensions unit mm Before. Beforemaking a servicemakingcall a service call Problems Possible causes RemediesBefore making a service call Warranty. Warranty