Toshiba RKP004Z instruction manual Selecting a language to be displayed, Press the F2 Lng key

Page 19

5. Operation in Top View Mode

(4) Peak/Minimum Hold setting

•“Update” is displayed. (If the [F1] key is not pressed.)

The instant the [F1] key is pressed in this situation, a measurement for peak hold/minimum hold starts. When the [F1] key is pressed, “ Update ” is displayed in reverse video. (If the [F1] key is pressed.)

5.3 Selecting a language to be displayed

A language to be displayed on the screen can be selected.

In this window, the language selected when turning on the remote keypad for the first time can also be changed to the other language.

Note) When an application CPU version of VFAS1 is less than V104, you cannot choose it other than English and Japanese.

1 Press the [F2] (Lng) key.

The Language selection window appears on the screen.

Select/confirm the desired language with the control dial.

Functions of function keys

F1 : Brings you to the Top View Mode.

2 Select/confirm the desired language with the control dial.

(In this example, Japanese is selected.)

Functions of function keys

F1 : Brings you to the Top View Mode.

Language selection

VEnglish

Deutsch Portuguese

Top

F1

Language selection

English

V

Deutsch Portuguese

Top

F1

5-4

Image 19

Contents LCD Remote Keypad „ Explanation of model code Introduction„ Check product purchase Model number Introduction „ Optional products„ Limitation of use Safetyprecautionsprecautions Explanation of markings„ Transportation and installation Safety precautions „ Handling in general„ Disposal Safety precautions „ Operations„ Notes on operations Contents Names. Namesand functionsand functions „ LCD panel Names and functionsNames and functions „ About the change of parameter settings Installing the remote keypad to the inverter Installing the LCD remote keypad Installing the remote keypad to the board optionalInverter unit Remote control optionalRemote keypad インバータ⇒パネル Language Selection window appears on the screen54. .標About準モニタモードavailable modes Top View ModeParameter Setup Mode Status Monitor ModeFunctions of function keys Operation. in Top View Modein Top View ModeSetting a panel operation frequency „ Explanation of the top window„ To change the frequency during operation Using an Easy key functionOperation Panel and Remote When used with a VF-PS1 inverter Operation in Top View ModeAlways Quick mode parameter PSEL=2 Operation Panel and Remote When used with a VF-AS1 inverterSelect/confirm the desired language with the control dial Operation in Top View Mode Peak/Minimum Hold settingSelecting a language to be displayed Press the F2 Lng keyPress the F4 key to carry out jog run Performing jog run60.0 Hz Emergency stop/reset operation„ In this window, settings can be changed Operation. in Parameter inSetupParameterModeSetup Mode„ When Quick mode is selected Select/confirm History function using the control dialOperation in Parameter Setup Mode Setting a basic parameterSelect/confirm Basic parameters using the control dial Select/confirm Extended parameters using the control dial Setting an extended parameterChange the parameter setting ［CMOd］ Select/confirm Changed Parameters using the control dialItems displayed Description Display Operation. in Status Monintor modeStatus Monitor ModeDisplaying details of an item monitored VFAS1 VFPS1 Operation. Operationby copy functionin a copy functionDisplay of copy finish Copy to LCDOperation by a copy function Display of copy loading（fixed screen）［Copy to the inverter］ Copy to inverterConfirm a memory information Function Key Display Position WarrantyList of function key functionsFunction Reference Specifications 710. 状態. モSpecificationsニタモードでの操作„ Outside dimensions unit mm Problems Possible causes Remedies Before. Beforemaking a servicemakingcall a service callBefore making a service call Warranty. Warranty