Toshiba RKP004Z instruction manual Performing jog run, Press the F4 key to carry out jog run

Page 20

5.Operation in Top View Mode

5.4Performing jog run

When Panel Jog Run is selected (parameter F262=1, CMOd=1), “JOG” is displayed in the lower right corner of the window. When “JOG” is displayed, jog run can be performed using the [F4] key.

The switching to jog run cannot be performed during operation. When switching to Jog Run mode, operation has to be stopped temporarily.

1 Press the [F4] key to carry out jog run.

The jog run frequency is displayed on the screen. (In this example, the operation frequency is set at 5.0Hz.)

Operation continues as long as the [F4] key is pressed, and it stops when the [F4] key is released.

Functions of function keys

F1 : Switches between Quick mode and Standard Setting mode.

F2 : Brings you to the Language selection window.

F4 : Executes a jog run command.

Top View Mode

FWD	60.0 Hz	STOP
		0.0 Hz

Quick	Lng	JOG

	Top View Mode
FWD	60.0 Hz	JOG
		5.0 Hz

Quick	Lng	JOG
F1	F2	F4

5-5

Image 20

Contents LCD Remote Keypad „ Check product purchase Introduction„ Explanation of model code Introduction „ Optional products Model numberSafetyprecautionsprecautions Explanation of markings „ Limitation of useSafety precautions „ Handling in general „ Transportation and installation„ Notes on operations Safety precautions „ Operations„ Disposal Contents Names. Namesand functionsand functions Names and functions „ LCD panelNames and functions „ About the change of parameter settings Installing the remote keypad to the inverter Installing the remote keypad to the board optional Installing the LCD remote keypadRemote keypad Remote control optionalInverter unit Language Selection window appears on the screen インバータ⇒パネルTop View Mode Parameter Setup ModeStatus Monitor Mode 54. .標About準モニタモードavailable modesOperation. in Top View Modein Top View Mode Setting a panel operation frequency„ Explanation of the top window Functions of function keysUsing an Easy key function „ To change the frequency during operationOperation in Top View Mode Always Quick mode parameter PSEL=2Operation Panel and Remote When used with a VF-AS1 inverter Operation Panel and Remote When used with a VF-PS1 inverterOperation in Top View Mode Peak/Minimum Hold setting Selecting a language to be displayedPress the F2 Lng key Select/confirm the desired language with the control dialPerforming jog run Press the F4 key to carry out jog runEmergency stop/reset operation 60.0 HzOperation. in Parameter inSetupParameterModeSetup Mode „ When Quick mode is selectedSelect/confirm History function using the control dial „ In this window, settings can be changedSelect/confirm Basic parameters using the control dial Setting a basic parameterOperation in Parameter Setup Mode Change the parameter setting Setting an extended parameterSelect/confirm Extended parameters using the control dial Select/confirm Changed Parameters using the control dial ［CMOd］Operation. in Status Monintor modeStatus Monitor Mode Items displayed Description DisplayDisplaying details of an item monitored Operation. Operationby copy functionin a copy function VFAS1 VFPS1Copy to LCD Operation by a copy functionDisplay of copy loading（fixed screen） Display of copy finishCopy to inverter ［Copy to the inverter］Confirm a memory information Function Reference WarrantyList of function key functionsFunction Key Display Position „ Outside dimensions unit mm 710. 状態. モSpecificationsニタモードでの操作Specifications Before. Beforemaking a servicemakingcall a service call Problems Possible causes RemediesBefore making a service call Warranty. Warranty