54. .標About準モニタモードavailable modes
The LCD remote keypad offers the following three modes, just as with the inverter’s main operation panel.
(1) Top View Mode
When the remote keypad is turned on, it enters this mode first. The top window displays the operating status.
In this mode, you can set a panel operation frequency, use a function key as the EASY key, and so on.
⇒Refer to “5. Operation in Top View Mode.”
(2)Parameter Setup Mode
This mode allows you to set parameters.
⇒Refer to “6. Parameter Setup Mode.”
(3)Status Monitor Mode
This mode allows you to monitor various kinds of statuses and information, such as the operating status of the inverter and information on the terminal board.
⇒Refer to “7. Operation in Status Monitor Mode.”
The figures below show the top windows of these modes.
To change from one mode to another, press the [ESC] key.
ESC
Top View Mode
FWD | 60.0 Hz | STOP |
|
| 0.0 Hz |
|
|
|
Quick | Lng |
ESC
|
|
|
|
| Top View Mode | ||||
|
|
|
|
|
|
|
|
|
|
| Status Monitor Mode |
|
|
|
|
| Parameter Setup Mode | ||
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
| Category Selection |
|
| |
|
|
|
|
|
|
| |||
|
|
|
|
|
|
| |||
| Rotative direction | FWD |
|
|
| History function |
| ||
| Frequency reference | 60.0Hz |
|
|
| Basic Parameters | |||
| Output current | 0% |
|
|
| Extended Parameters | |||
| Input voltage | 99% |
|
|
| Changed Parameters | |||
| Output voltage | 0% |
|
|
|
|
|
| |
Top | Prm | Top | Mon |
Status Monitor Mode | Parameter Setup Mode |
* When Quick mode is selected
ESCwith the EASY key, other windows are displayed.