Toshiba RKP004Z instruction manual Setting an extended parameter, Change the parameter setting

Page 24

6. Operation in Parameter Setup Mode

3 Using the control dial, select/confirm the setting you want to change by selecting a menu item or specifying a value.

(In this example, “Panel / LCD-option” is selected and confirmed or a frequency of 90.0Hz is specified and confirmed.)

When the change you made is saved, the title of the parameter stops blinking and the screen returns to the previous window.

●If the setting selected is changed by selecting a menu item

Basic Parameters

CMOd

Command input mode

0 :Terminal

1 :Panel / LCD-option口∨

2 :RS485-2wire

3 :RS485-3wire

●If the setting selected is changed by specifying a value

Basic Parameters

vL

Base frequency 1

90.0 Hz

min=25.0max=500.0

×1000

×100

×10

×1

6.3 Setting an extended parameter

1 Select/confirm “Extended parameters” using the control dial.

The Extended Parameters window appears.

Functions of function keys

F1 : Displays parameters in the number range of

900.

The number displayed decrements each time this key is pressed.

F2 : Displays the previous window.

F3 : Displays the next window.

F4 : Displays parameters in the number range of

200.

The number displayed increments each time this key is pressed.

		Parameter Setup Mode
		Extended Parameters


	F100	:Low-speed signal freq
	F101	:Speed reach frequency
	F102	:Speed reach freq band
	F105	:Priority of FWD/REV
	F106	:Input terminal priority
	F9--						F2--
	F9--						F2--

	F1	F2		F3			F4

2 Change the parameter setting.

To do this, perform steps 2 and 3 in the “6.2 Setting a basic parameter” section.

6-3

Image 24

Contents LCD Remote Keypad Introduction „ Explanation of model code„ Check product purchase Introduction „ Optional products Model numberSafetyprecautionsprecautions Explanation of markings „ Limitation of useSafety precautions „ Handling in general „ Transportation and installationSafety precautions „ Operations „ Disposal„ Notes on operations Contents Names. Namesand functionsand functions Names and functions „ LCD panelNames and functions „ About the change of parameter settings Installing the remote keypad to the inverter Installing the remote keypad to the board optional Installing the LCD remote keypadRemote control optional Inverter unitRemote keypad Language Selection window appears on the screen インバータ⇒パネルTop View Mode Parameter Setup ModeStatus Monitor Mode 54. .標About準モニタモードavailable modesOperation. in Top View Modein Top View Mode Setting a panel operation frequency„ Explanation of the top window Functions of function keysUsing an Easy key function „ To change the frequency during operationOperation in Top View Mode Always Quick mode parameter PSEL=2Operation Panel and Remote When used with a VF-AS1 inverter Operation Panel and Remote When used with a VF-PS1 inverterOperation in Top View Mode Peak/Minimum Hold setting Selecting a language to be displayedPress the F2 Lng key Select/confirm the desired language with the control dialPerforming jog run Press the F4 key to carry out jog runEmergency stop/reset operation 60.0 HzOperation. in Parameter inSetupParameterModeSetup Mode „ When Quick mode is selectedSelect/confirm History function using the control dial „ In this window, settings can be changedSetting a basic parameter Operation in Parameter Setup ModeSelect/confirm Basic parameters using the control dial Setting an extended parameter Select/confirm Extended parameters using the control dialChange the parameter setting Select/confirm Changed Parameters using the control dial ［CMOd］Operation. in Status Monintor modeStatus Monitor Mode Items displayed Description DisplayDisplaying details of an item monitored Operation. Operationby copy functionin a copy function VFAS1 VFPS1Copy to LCD Operation by a copy functionDisplay of copy loading（fixed screen） Display of copy finishCopy to inverter ［Copy to the inverter］Confirm a memory information WarrantyList of function key functions Function Key Display PositionFunction Reference 710. 状態. モSpecificationsニタモードでの操作 Specifications„ Outside dimensions unit mm Before. Beforemaking a servicemakingcall a service call Problems Possible causes RemediesBefore making a service call Warranty. Warranty