Toshiba RKP004Z instruction manual Setting a basic parameter, Operation in Parameter Setup Mode

6. Operation in Parameter Setup Mode

6.2 Setting a basic parameter

When Quick mode is selected using the EASY key function, skip step 1. Go straight to step 2.

1 Select/confirm “Basic parameters” using the control dial.

The Basic Parameters window appears.

Functions of function keys

F1 : Brings you to the Top View Mode.

F2 : Displays the previous window.

F3 : Displays the next window.

2 Select/confirm the parameter setting you want to change, using the control dial.

(Ex. Select/confirm “Command input mode” and “Base frequency 1.”

The Parameter Setting window appears.

	Parameter Setup Mode
	Basic Parameters
AU1	:Automatic acc/dec
AU2	:Automatic torque boost
AU4	:Automatic function set
CMOd	:Command input mode
FMOd	:Frequency input mode 1
Top
F1	F2	F3

If the setting selected is changed by selecting a menu item, the menu item selected is highlighted and marked with a checkmark.

Functions of function keys

F2 : Displays the previous window.

F3 : Displays the next window.

If the setting selected is changed by specifying a value, the value specified is displayed. In addition, the minimum allowable value (min) and the maximum allowable value (max) are also displayed at the bottom of the window.

Functions of function keys

The functions keys allow you to select the position or decimal place of each figure (operation frequency) you want to increment or decrement with the control dial.

F1 : Selects the position of hundreds.

F2 : Selects the position of tens.

F3 : Selects the position of ones.

F4 : Selects the first decimal place.

●If the setting selected is changed by selecting a menu item

Basic Parameters

CMOd

Command input mode

0	:Terminal	口
		∨
1	:Panel / LCD-option
2	:RS485-2wire
3	:RS485-3wire

F2 F3

●If the setting selected is changed by specifying a value

Basic Parameters

vL

Base frequency 1

60.0 Hz

min=25.0max=500.0

×1000	×100	×10	×1
F1	F2	F3	F4

6-2