Toshiba RKP004Z instruction manual Installing the remote keypad to the inverter

Page 11

2.Installing the LCD remote2.keypadInstalling the LCD remote keypad

The LCD remote keypad can be installed on the inverter and on the board (optional). Using this LCD remote keypad along with a dedicated interconnect cable makes it possible to operate the inverter by remote control (optional).

2.1 Installing the remote keypad to the inverter

Turn off the inverter, and then follow these steps.

1 Remove the serial RS485 port cover from the inverter’s main operation panel.

To detach the cover, wrench it open using

aflat-blade screwdriver or any other flat-tipped tool.

2 Mount the remote keypad on the inverter’s main operation panel. Insert the connector on the remote keypad into the RS485 port while pushing in the lock knobs, and then release the lock knobs to secure the remote keypad.

3 Make sure the remote keypad is fixed securely to the inverter.

2-1

Image 11

Contents LCD Remote Keypad „ Check product purchase Introduction„ Explanation of model code Model number Introduction „ Optional products„ Limitation of use Safetyprecautionsprecautions Explanation of markings„ Transportation and installation Safety precautions „ Handling in general„ Notes on operations Safety precautions „ Operations„ Disposal Contents Names. Namesand functionsand functions „ LCD panel Names and functionsNames and functions „ About the change of parameter settings Installing the remote keypad to the inverter Installing the LCD remote keypad Installing the remote keypad to the board optionalRemote keypad Remote control optionalInverter unit インバータ⇒パネル Language Selection window appears on the screen54. .標About準モニタモードavailable modes Top View ModeParameter Setup Mode Status Monitor ModeFunctions of function keys Operation. in Top View Modein Top View ModeSetting a panel operation frequency „ Explanation of the top window„ To change the frequency during operation Using an Easy key functionOperation Panel and Remote When used with a VF-PS1 inverter Operation in Top View ModeAlways Quick mode parameter PSEL=2 Operation Panel and Remote When used with a VF-AS1 inverterSelect/confirm the desired language with the control dial Operation in Top View Mode Peak/Minimum Hold settingSelecting a language to be displayed Press the F2 Lng keyPress the F4 key to carry out jog run Performing jog run60.0 Hz Emergency stop/reset operation„ In this window, settings can be changed Operation. in Parameter inSetupParameterModeSetup Mode„ When Quick mode is selected Select/confirm History function using the control dialSelect/confirm Basic parameters using the control dial Setting a basic parameterOperation in Parameter Setup Mode Change the parameter setting Setting an extended parameterSelect/confirm Extended parameters using the control dial ［CMOd］ Select/confirm Changed Parameters using the control dialItems displayed Description Display Operation. in Status Monintor modeStatus Monitor ModeDisplaying details of an item monitored VFAS1 VFPS1 Operation. Operationby copy functionin a copy functionDisplay of copy finish Copy to LCDOperation by a copy function Display of copy loading（fixed screen）［Copy to the inverter］ Copy to inverterConfirm a memory information Function Reference WarrantyList of function key functionsFunction Key Display Position „ Outside dimensions unit mm 710. 状態. モSpecificationsニタモードでの操作Specifications Problems Possible causes Remedies Before. Beforemaking a servicemakingcall a service callBefore making a service call Warranty. Warranty