Safety precautions
Operations
Warning
| ●Do not apply a dropping shock or other physical shocks. | |
| Otherwise, damage or malfunction will result. | |
| ●Do not pull on the cable and connector | |
| It may cause damage or error. | |
Prohibited | ●Even if this product is deactivated by an unusual event such as tripping, an | |
operating error, power outage, etc. do not bring any regions of your body into | ||
| ||
| contact with the inverter terminals when power is supplied to the inverter. | |
| Contact during the | |
| ●Use an additional safety device with your inverter or system to prevent a | |
| serious accident due to the unit malfunctions. Usage without an additional | |
| safety device may cause an accident. | |
Mandatory | ●Make sure to check that the parameter data from this product is not | |
accidentally copied to the wrong inverter. | ||
| Usage with wrong parameter may result in an accident. | |
| Caution |
Mandatory
●Set up “Communication error trip time (F803, F804, see the inverter instruction manual for details)” to stop the inverter when Remote Keypad is deactivated by an unusual event such as tripping, an operating error, power outage, failure, etc. Deactivated Remote Keypad may cause an accident, if the “Communication error trip time” is not properly set up.
Disposal
Caution
Mandatory
●If you dispose off this unit, have it done by a specialist in industrial waste disposal*. Improper disposal may result in explosion of capacitors or produce noxious gases, resulting in injury.
(*)Persons who specialize in the processing of waste and known as “Industrial Waste Product Collectors and Transporters” or “Industrial Waste Disposal Persons.” If the collection, transport and disposal of industrial waste is done by someone who is not licensed for that job, it is a punishable violation of the law (Laws in regard to cleaning and processing of waste materials).
Notes on operations
Notes
●Avoid installing in a place where ambient temperature or/and humidity change sharply.
●Keep the interconnect cable separate from the power cable of the inverter to prevent the inverter from malfunctioning due to electromagnetic noise.
●It is recommended to install the unit on the panel board of a cabinet if it is used as a remote operation panel. Improperly installed units may result in damage and malfunction.
ⅲⅴ