Visioneer 1270, 1770, 1170, 1780 owner manual Contrast Setting, Manual Transmission

Models: 1780 1170 1770 1270

1 99
Download 99 pages 63.53 Kb
Page 44
Image 44

34

C H A P T E R F I V E

 

See

One-Touch

Dialing

p. 23

Press Resolution (before you send the fax)to select the resolution for the document you’re sending.

Standard — suitable for most typed documents.

Fine — good for small print; transmits a little slower than standard resolution.

Super Fine — good for small print or artwork; transmits slower than fine resolution.

Photo — use when document has varying shades of gray; slowest transmission time.

DO NOT use curled, wrinkled, folded, or ripped paper, or paper with staples, paper clips, paste or tape attached. DO NOT use cardboard, newspaper, or fabric.

Make sure documents written with ink are completely dry.

Contrast Setting

If your document is very light or very dark, you might want to set the contrast accordingly. Use S.LIGHT to send a very light document. Use S.DARK to send a very dark document.

1Insert the document, face down, in the feeder.

2Press Function , 1 , 4 .

3Use or to select AUTO, S.LIGHT, or S.DARK.

4When the screen displays your selection, press Set .

5Press Stop to exit.

6Enter a fax number and press Start to send a fax — OR — Press Copy to make a copy.

Manual Transmission

Manual transmission lets you hear the dial tone, ringing, and fax receiving tones before sending the fax.

1Insert the document face down in the feeder.

2Pick up the handset and listen for a dial tone

OR — Press Hook and listen for a dial tone.

3Enter the fax number you want to call (you can enter the digits using the keypad, or you can enter a One Touch or Speed Dial number or you can call from the Tel-index).

Page 44
Image 44
Visioneer 1270, 1770, 1170, 1780 owner manual Contrast Setting, Manual Transmission