Visioneer 1780, 1270, 1770 Changing Remote Retrieval Access Code, Fax Fwd, FWD# Enter & SET

R E M O T E F A X O P T I O N S 61

Programming a Fax Forwarding Number

When Fax Forwarding is set to ON, your fax machine stores the received fax in memory, then dials the fax forwarding number you’ve programmed, and forwards the fax message.

1

2

3

4

5

6

Press Function , 8 , 2 .

Press or until the screen displays

FAX FWD

Press Set . The screen prompts you to enter the number of the fax machine where faxes will be forwarded.

FWD#:

ENTER & SET

Enter the forwarding number (up to 20 digits).

Press Set .

Press Stop to exit.

Remote Retrieval

You can call your machine from any fax machine using touch tone and use a Remote Retrieval Access Code and other button presses to retrieve fax messages.

Changing Remote Retrieval Access Code

Enter your Remote Retrieval Access Code when the fax machine picks up your call, so you can access features remotely. The access code is preset to 1 5 9 ✳, but you can change this.

1

2

Press Function , 8 , 3 .

Enter a three-digit number from 000 to 999, then . You must end the Remote Access Code with . Do not use the same digits that appear in your Remote Activation or Deactivation Code (page 53).

3Press Set .

4Press Stop to exit.