F A X S E T T I N G S

25

 

 

 

See

Storing

One Touch

Dial

Numbers

p. 22

and

Storing

Speed Dial

Numbers

p. 24

Changing One Touch and

Speed Dial Numbers

If you try to store a One Touch or Speed Dial number in a location where a number is already stored, the screen displays the current name stored there, then prompts you to either

1.CHANGE OR 2. EXIT.

1Press 1 to change the number stored — OR — Press 2 to exit without making a change.

2If you want to erase the number, press Clear when the cursor is to the far left of the digits.

3If you want to change a digit, use or to position the cursor under the digit you want to change, then press Clear .

4Enter a new number.

5Follow the directions from Step 4 in Storing One Touch Numbers or Storing Speed Dial Numbers.

Setting Groups for Broadcasting

Number Groups allow you to send the same fax message to many fax numbers by pressing only one One Touch key (Broadcasting) and Start . First, you’ll need to store each fax number as a One Touch or Speed Dial number. Then, you can combine them into a Group. Each Number Group uses a One Touch key. Finally, you can have up to 6 small Number Groups, or you can assign many numbers to one large group. If you have Model FAX 1170 you can assign up to 49 numbers to one large group, and for Models FAX 1270, MFC 1770 and MFC 1780 up to 59 numbers to one large group.

1Press Function , 4 , 3 . The screen displays

SELECT ONE-TOUCH

2Select a One Touch key to be the Group Number. (For example, press one touch location 02 for group 2.)

3Use the dial pad to enter the group number (for example, press 1 for group 1).

SETUP GROUP:GO

ENTER & SET

Page 35
Image 35
Visioneer 1780, 1270 Changing One Touch Speed Dial Numbers, Setting Groups for Broadcasting, Setup Groupgo Enter & SET