62 | C H A P T E R E I G H T |
|
Using Remote Retrieval Access Code
1Dial your fax number from a touch tone phone.
2When your fax machine answers and beeps, immediately enter your Remote Retrieval Access Code (159✳).
3
4
5
6
Your fax machine signals the kinds of messages received:
1 long beep — Fax message(s)
No beeps — no messages.
Your fax machine then prompts you with two short beeps to enter a command. If you wait longer than 30 seconds to enter a command, your machine hangs up. If you enter an invalid command, your machine beeps three times.
Press 9 0 to reset your machine when you finish.
Hang up.
Remote Commands
Follow the commands below to access features remotely. When you call the fax machine and enter your Remote Retrieval Access Code (159✳), the system will signal you with two short beeps to enter a remote command.
Change Paging/Fax Forwarding Setting
Press 9 5 .
then to
Turn feature off — Press 1 .
Enter Fax Forwarding — Press 2 .
Enter Paging — Press 3 .
Program Fax Forward Number — Press 4 , then retrieve Memory Status List (see page 64).
Confirm Fax Forward Number — Press 5 .
Turn Fax Storage ON — Press 6 .
Turn Fax Storage OFF — Press 7 .
