A D V A N C E D F A X O P E R A T I O N | 53 |
| |
|
|
See
Setting Fax
Storage
p. 59
Changing Remote Codes
Remote Codes might not work with some telephone systems. The preset Activation
Code is | 5 1 . The preset Deactivation Code is | 5 1 . |
If you are always disconnected when accessing your TAD remotely, try changing
the Activation Code from | 5 1 to | and the Deactivation Code | |
from | 5 1 to 9 9 | 9 . |
|
To change Remote Codes
1Press Function , 7 , 5 .
2Press 
or 
to select ON or OFF.
REMOTE ACT.:ON
3Press Set when the screen displays the setting you want.
4If you want to, enter a new Remote Activation Code, then wait 2 seconds.
ACT.CODE:*51
5If you want to, enter a new Remote Deactivation Code, then wait 2 seconds.
DEACT.CODE:#51
6Press Stop to exit.
Printing a Fax in Memory (Only for FAX 1270, MFC 1770 and MFC1780)
If you have fax storage ON for remote retrieval, you can still print a fax in the memory when you are at your machine:
1 Press 8 4 .
2Press Start .
3Press Stop .
Distinctive Ring
This fax machine feature lets you use the Distinctive Ring subscriber service offered by some telephone companies, which allows you to have several telephone numbers on one phone line. Each phone number has its own Distinctive Ring pattern, so you know which phone number is ringing. This is one way you can have a separate phone number for your fax machine.
Your fax machine has a Distinctive Ring function, allowing you to dedicate one phone number just for receiving faxes. You’ll need to follow the directions below
