Start .

M A I N T E N A N C E A N D T R O U B L E S H O O T I N G

79

 

 

 

See

For FAX/TEL

Mode Only

p. 52

Sending Faxes

Poor Transmitting Quality

Try changing your resolution to FINE or SUPERFINE (see “Resolution” p. 34). Make a copy to verify the fax machine’s scanner operation.

Dialing Does Not Work

Check for a dial tone.

Change TONE/PULSE setting (see “Setting Dialing Mode (Tone/Pulse)” p. 19).

Check all line cord connections, and make sure the curled handset cord is not in the EXT jack.

Check power cord connection.

Send a manual fax by pressing Hook OR — Lifting the handset, and dialing the number. Wait to hear fax receiving tones before pressing

Vertical Black Lines When Sending

Use your fax machine to make a copy. If the copy shows the same problem, the scanner area is dirty. Lift the front cover and check the document path. Clean the scanner’s white roller and the glass strip under the roller using isopropyl alcohol and a lint-free cloth (see p. 74).

Handling Incoming Calls

Double Ring in FAX/TEL Mode

The fax machine knows the incoming call is not a fax so it is signaling you to answer the telephone call. Pick up the fax machine handset or answer from an extension phone and press your fax machine’s Deactivation Code (default setting is #51).

Transferring a Call to the Fax Machine

If you have answered the fax machine handset, press Start , and hang up immediately.

If you answered at an extension phone, press your three-digit Activation Code (the factory setting is 51). When your fax machine answers, hang up.

Page 89
Image 89
Visioneer 1770, 1270, 1170, 1780 owner manual Sending Faxes, Handling Incoming Calls