Dell 1100 Copying CDs and DVDs, Adjusting the Picture, How to Copy a CD or DVD, 800 by 600 pixels

Adjusting the Picture

If an error message notifies you that the current resolution and color depth are using too much memory and preventing DVD playback, adjust the display properties:

1Click the Start button and click Control Panel.

2Under Pick a category, click Appearance and Themes.

3Under Pick a task..., click Change the screen resolution.

4In the Display Properties window, click and drag the bar in Screen resolution to change the setting to

800 by 600 pixels.

5Click the drop-down menu under Color quality, and then click Medium (16 bit).

6Click OK.

Copying CDs and DVDs

NOTE: Please observe all copyright laws when creating CDs or DVDs.

This section applies only to computers that have a CD-RW, DVD+/-RW, or CD-RW/DVD (combo) drive.

NOTE: The types of CD or DVD drives offered by Dell may vary by country.

The following instructions explain how to make an exact copy of a CD or DVD. You can also use Sonic DigitalMedia for other purposes, such as creating music CDs from audio files stored on your computer or backing up important data. For help, open Sonic DigitalMedia and then click the question mark icon in the upper-right corner of the window.

How to Copy a CD or DVD

NOTE: CD-RW/DVD combo drives cannot write to DVD media. If you have a CD-RW/DVD combo drive and you experience recording problems, check for available software patches on the Sonic support website at www.sonic.com.

The DVD-writable drives installed in Dell™ computers can write to and read DVD+/-R, DVD+/-RW and DVD+R DL (dual layer) media, but cannot write to and may not read DVD-RAM or DVD-R DL media.

NOTE: Most commercial DVDs have copyright protection and cannot be copied using Sonic DigitalMedia.

1Click the Start button, point to All Programs→ Sonic→ DigitalMedia Projects and then click Copy.

2Under the Copy tab click Disc Copy.

3To copy the CD or DVD:

•If you have one CD or DVD drive, ensure that the settings are correct and click the Disc Copy button. The computer will read your source CD or DVD and copy the data to a temporary folder on your computer hard drive.

When prompted, insert a blank CD or DVD into the drive and click OK.

16

Setting Up and Using Your Computer