NETGEAR JNR1010V2 user manual Internet IP Address

Page 27

JNR1010v2 N150 Wireless Router

-Manually Connect. You connect and disconnect manually. For information about how to connect to the Internet, see Connection Status on page 75. The Connect and Disconnect buttons in the Connection Status screen display only when the connection mode is Manually Connect.

•Idle Timeout (In Minutes). If you want to change the login time-out, enter a new value in minutes. This setting determines how long the router keeps the Internet connection active after no Internet activity from the LAN is detected. Entering a value of 0 (zero) means never log out.

•Internet IP Address:

-Get Dynamically from ISP. Your ISP uses DHCP to assign your IP address. Your ISP automatically assigns these addresses.

-Use Static IP Address. Enter the IP address, IP subnet mask, and the gateway IP address that your ISP assigned to you. The gateway is the ISP router to which your router connects.

•Domain Name Server (DNS) Address. The DNS server is used to look up site addresses based on their names. Select one of the following radio buttons:

-Get Automatically from ISP. Your ISP uses DHCP to assign your DNS servers. Your ISP automatically assigns these IP addresses.

-Use These DNS Servers. If you know that your ISP does not automatically transmit DNS addresses to the router during login, select this radio button, and enter the IP address of your ISP primary DNS server. If a secondary DNS server address is available, enter it also.

•Router MAC Address. The Ethernet MAC address used by the router on the Internet port. Some ISPs register the MAC address of the network interface card in your computer when your account is first opened. They accept traffic only from the MAC address of that computer. This feature allows your router to use your computer’s MAC address (this situation is also called spoofing or cloning). Select one of the following radio buttons:

-Use Default Address. Use the default MAC address.

-Use Computer MAC Address. The router captures and uses the MAC address of the computer that you are now using to configure the router. To configure the router, use the computer that is registered with the ISP.

-Use This MAC Address. Enter the MAC address that you want to use.

4.Enter the settings for the IP address and DNS server.

The default settings usually work fine. If you have problems with your connection, check the ISP settings.

5.Click the Apply button.

6.Click the Test button.

Your Internet connection is tested. If the router does not detect the Internet connection and the NETGEAR website does not display within one minute, see Chapter 8, Troubleshooting.

genie BASIC Settings

27

Page 26 Page 28
Image 27
Page 26 Page 28
Contents JNR1010v2 N150 Wireless Router Support ComplianceTrademarks Contents Administration Appendix a Supplemental Information Get to know your router Hardware SetupUnpack Your Router Hardware FeaturesRouter front panel has the following status LEDs Front PanelJNR1010v2 N150 Wireless Router Front panel LED descriptions Back Panel Back panel has the following ports, button, and connectorPosition Your Router Label To position your router  To prepare your router for installation Cable Your Router  To start your network Verify the CablingConnect to the router Get Started with Netgear genieUse Standard TCP/IP Properties for Dhcp Router Setup PreparationTypes of Logins and Access Wireless Devices and Security SettingsNetgear genie Setup  To use Netgear genie to set up your routerBrowse to http//routerlogin.net Upgrade Router Firmware Log In to Your Router After InstallationBasic Home Screen Select Advanced Administration Set Password Change the PasswordPassword Recovery  To set up password recoverySelect the Enable Password Recovery check box  To recover your password Manual Method Add Wireless Devices or Computers to Your NetworkWi-Fi Protected Setup Method  To use WPS to join the wireless networkYour Internet connection and network Genie Basic SettingsInternet Setup  To view or change the Internet setupSelect Basic Internet Internet IP Address Internet IP Address Select Basic Wireless Basic Wireless SettingsGenie Basic Settings Genie Basic Settings Security Options WPA-PSK and WPA-PSK + WPA2-PSK Mixed ModeWEP  To configure the WEP security and wireless passphraseGenie Basic Settings Attached Devices  To view the devices that are connected to your networksSelect Basic Attached Devices  To set up a guest network Guest NetworkSelect Basic Guest Network Genie Basic Settings Genie Advanced Home Specify custom settings To launch the Setup Wizard Setup WizardGenie Advanced Home  To use the WPS Wizard WPS WizardGenie Advanced Home WAN Setup  To change the WAN settingsSelect Advanced Setup WAN Setup Genie Advanced Home Default DMZ Server Change the MTU Size  To set up a default DMZ serverLAN Setup  To change the MTU sizeLAN IP address  To change the LAN settings Use Router as Dhcp Server  To reserve an IP address Set Up Address Reservation To disable the Dhcp server feature Clear the Use Router as Dhcp Server check box To edit or delete a reserved address entry Genie Advanced Home Manage your network Administration To check for new firmware and update your router Manually Update the Router FirmwareSelect Advanced Administration Backup Settings Manage the Configuration FileBack Up Settings  To back up the router’s configuration settingsRestore Configuration Settings  To restore configuration settings that you backed upDo not interrupt the reboot process Erase Configuration Settings Enhance the performance of your router Advanced SettingsAdvanced Wireless Settings Advanced Settings for Your Wireless Network To change advanced settings for your wireless network  To enable or disable the wireless router radio Enable or Disable Wireless Router Radio To configure and enable the wireless schedule Set Up a Wireless Schedule To change the WPS settings for your wireless network Set Up the WPS SettingsWireless repeating scenario Wireless Distribution SystemSelect the Enable Wireless Repeating Function check box Set Up the Base Station To set up the base station Select Advanced Advanced Setup Wireless Repeating FunctionSelect the Wireless Base Station radio button Set Up a RepeaterComplete the Repeater IP Address field  To configure the router as a repeater To set up a static route Select Advanced Advanced Setup Static RoutesStatic Routes Advanced Settings  To edit or delete a static route Universal Plug and Play To configure Universal Plug and Play Advanced Settings Monitor your router and network traffic MonitoringRouter Status and Usage Information Screen LAN Port Router Information PaneInternet Port Pane  To display the Router Information pane To view the traffic statistics StatisticsConnection Status  To view the connection statusDhcp connection Pptp connection PPPoE connection To display the Guest Network pane Wireless Settings Pane To display the Wireless Settings pane Guest Network PaneMonitoring Find and fix problems TroubleshootingSequence to Restart Your Network Wireless SettingsNetwork Settings Quick TipsPower LED Is Off or Blinking Power LED Stays AmberTroubleshoot with the LEDs WPS Button Blinks Amber WiFi LED Is OffAll LEDs Remain Lit After Startup Internet or Ethernet Port LEDs Are OffCannot Log In to the Router Cannot Access the Internet Troubleshoot Internet Browsing To check the WAN IP address  To troubleshoot a PPPoE Internet connection Troubleshoot a PPPoE Internet ConnectionTest the LAN Path to Your Router Wireless ConnectivityTroubleshoot Your Network Using the Ping Utility Changes Not Saved To ping the router from a computer running Windows Test the Path from Your Computer to a Remote DeviceTroubleshooting Additional details Supplemental InformationJNR1010v2 router factory default settings Factory SettingsJNR1010v2 router specifications Technical Specifications
Related manuals
Manual 77 pages 12.78 Kb
Top Page Image Contents