NETGEAR JNR1010V2 user manual Log In to Your Router After Installation, Upgrade Router Firmware

Page 18

JNR1010v2 N150 Wireless Router

Log In to Your Router After Installation

When you first set up your router, NETGEAR genie automatically starts when you launch an Internet browser on a computer that is connected to the router.

To use NETGEAR genie again to view or change settings for the router:

1.Launch your browser from a computer or wireless device that is connected to the router.

2.Enter http://www.routerlogin.net in the web browser address bar. A login screen displays.

3.Enter the router user name and password.

The default user name is admin. The default password is password. The user name and password are case-sensitive.

Note: The router user name and password are different from the user name and password for logging in to your Internet connection. For more information, see Types of Logins and Access on page 16.

4.Click the OK button.

Upgrade Router Firmware

When you set up your router and are connected to the Internet, the router automatically checks for you to see if newer firmware is available. If it is, a message is displayed on the top of the screen. The message might be A router firmware upgrade is available, or a similar message.

To upgrade the firmware after the router has detected newer firmware and displays a message:

1.Click the message.

The Firmware Upgrade Assistant displays.

Get Started with NETGEAR genie

18

Image 18

Contents JNR1010v2 N150 Wireless Router Support ComplianceTrademarks Contents Administration Appendix a Supplemental Information Hardware Setup Get to know your routerHardware Features Unpack Your RouterFront Panel Router front panel has the following status LEDsJNR1010v2 N150 Wireless Router Front panel LED descriptions Back panel has the following ports, button, and connector Back PanelPosition Your Router Label To position your router  To prepare your router for installation Cable Your Router Verify the Cabling  To start your networkGet Started with Netgear genie Connect to the routerWireless Devices and Security Settings Router Setup PreparationTypes of Logins and Access Use Standard TCP/IP Properties for DhcpNetgear genie Setup  To use Netgear genie to set up your routerBrowse to http//routerlogin.net Log In to Your Router After Installation Upgrade Router FirmwareBasic Home Screen Change the Password Select Advanced Administration Set PasswordPassword Recovery  To set up password recoverySelect the Enable Password Recovery check box  To recover your password  To use WPS to join the wireless network Add Wireless Devices or Computers to Your NetworkWi-Fi Protected Setup Method Manual MethodGenie Basic Settings Your Internet connection and networkInternet Setup  To view or change the Internet setupSelect Basic Internet Internet IP Address Internet IP Address Basic Wireless Settings Select Basic WirelessGenie Basic Settings Genie Basic Settings WPA-PSK and WPA-PSK + WPA2-PSK Mixed Mode Security Options To configure the WEP security and wireless passphrase WEPGenie Basic Settings Attached Devices  To view the devices that are connected to your networksSelect Basic Attached Devices  To set up a guest network Guest NetworkSelect Basic Guest Network Genie Basic Settings Specify custom settings Genie Advanced HomeSetup Wizard  To launch the Setup WizardGenie Advanced Home WPS Wizard  To use the WPS WizardGenie Advanced Home WAN Setup  To change the WAN settingsSelect Advanced Setup WAN Setup Genie Advanced Home Default DMZ Server  To set up a default DMZ server Change the MTU SizeLAN Setup  To change the MTU sizeLAN IP address  To change the LAN settings Use Router as Dhcp Server Clear the Use Router as Dhcp Server check box Set Up Address Reservation To disable the Dhcp server feature  To reserve an IP address To edit or delete a reserved address entry Genie Advanced Home Administration Manage your networkManually Update the Router Firmware  To check for new firmware and update your router To back up the router’s configuration settings Manage the Configuration FileBack Up Settings Select Advanced Administration Backup SettingsRestore Configuration Settings  To restore configuration settings that you backed upDo not interrupt the reboot process Erase Configuration Settings Advanced Settings Enhance the performance of your routerAdvanced Wireless Settings Advanced Settings for Your Wireless Network To change advanced settings for your wireless network Enable or Disable Wireless Router Radio  To enable or disable the wireless router radioSet Up a Wireless Schedule  To configure and enable the wireless scheduleSet Up the WPS Settings  To change the WPS settings for your wireless networkWireless Distribution System Wireless repeating scenarioSelect Advanced Advanced Setup Wireless Repeating Function Set Up the Base Station To set up the base station Select the Enable Wireless Repeating Function check boxSet Up a Repeater Select the Wireless Base Station radio button To configure the router as a repeater Complete the Repeater IP Address field To set up a static route Select Advanced Advanced Setup Static RoutesStatic Routes Advanced Settings Universal Plug and Play  To edit or delete a static route To configure Universal Plug and Play Advanced Settings Monitoring Monitor your router and network trafficRouter Status and Usage Information Screen  To display the Router Information pane Router Information PaneInternet Port Pane LAN PortStatistics  To view the traffic statisticsConnection Status  To view the connection statusDhcp connection PPPoE connection Pptp connectionGuest Network Pane Wireless Settings Pane To display the Wireless Settings pane  To display the Guest Network paneMonitoring Troubleshooting Find and fix problemsQuick Tips Wireless SettingsNetwork Settings Sequence to Restart Your NetworkPower LED Is Off or Blinking Power LED Stays AmberTroubleshoot with the LEDs Internet or Ethernet Port LEDs Are Off WiFi LED Is OffAll LEDs Remain Lit After Startup WPS Button Blinks AmberCannot Log In to the Router Cannot Access the Internet Troubleshoot Internet Browsing To check the WAN IP address Troubleshoot a PPPoE Internet Connection  To troubleshoot a PPPoE Internet connectionChanges Not Saved Wireless ConnectivityTroubleshoot Your Network Using the Ping Utility Test the LAN Path to Your RouterTest the Path from Your Computer to a Remote Device  To ping the router from a computer running WindowsTroubleshooting Supplemental Information Additional detailsFactory Settings JNR1010v2 router factory default settingsTechnical Specifications JNR1010v2 router specifications

Related manuals

Manual 77 pages 12.78 Kb