NETGEAR JNR1010V2 user manual Statistics,  To view the traffic statistics

Page 74

JNR1010v2 N150 Wireless Router

•Connection. Shows whether the router is using a fixed or dynamic IP address on the Internet port. If the value is DHCP, the router obtains an IP address dynamically from the ISP or from a DHCP server on your LAN.

•IP Subnet Mask. The IP subnet mask that the Internet port of the router uses.

•Domain Name Server. The Domain Name Server address that the router uses. A Domain Name Server translates human-language URLs such as www.netgear.com into IP addresses.

Statistics

The router provides various statistics.

To view the traffic statistics:

1.Log in to the router.

For more information, see Log In to Your Router After Installation on page 18.

2.Click the ADVANCED tab.

The Router Status screen displays.

3.In the Internet Port pane, click the Show Statistics button. A pop-up screen displays traffic statistics:

The following information displays:

•System Up Time. The time elapsed since the router was last restarted.

•Port. The statistics for the WAN (Internet) port and the four LAN (Ethernet) ports.

•Status. The link status of the port.

•TxPkts. The number of packets transmitted on this port since reset or manual clear.

•RxPkts. The number of packets received on this port since reset or manual clear.

•Collisions. The number of collisions on this port since reset or manual clear.

•Up Time. The time elapsed since this port acquired the link.

Monitoring

74

Image 74

Contents JNR1010v2 N150 Wireless Router Trademarks SupportCompliance Contents Administration Appendix a Supplemental Information Hardware Setup Get to know your routerHardware Features Unpack Your RouterFront Panel Router front panel has the following status LEDsJNR1010v2 N150 Wireless Router Front panel LED descriptions Back panel has the following ports, button, and connector Back Panel To position your router Position Your RouterLabel  To prepare your router for installation Cable Your Router Verify the Cabling  To start your networkGet Started with Netgear genie Connect to the routerWireless Devices and Security Settings Router Setup PreparationTypes of Logins and Access Use Standard TCP/IP Properties for DhcpBrowse to http//routerlogin.net Netgear genie Setup To use Netgear genie to set up your router Log In to Your Router After Installation Upgrade Router FirmwareBasic Home Screen Change the Password Select Advanced Administration Set PasswordSelect the Enable Password Recovery check box Password Recovery To set up password recovery  To recover your password  To use WPS to join the wireless network Add Wireless Devices or Computers to Your NetworkWi-Fi Protected Setup Method Manual MethodGenie Basic Settings Your Internet connection and networkSelect Basic Internet Internet Setup To view or change the Internet setup Internet IP Address Internet IP Address Basic Wireless Settings Select Basic WirelessGenie Basic Settings Genie Basic Settings WPA-PSK and WPA-PSK + WPA2-PSK Mixed Mode Security Options To configure the WEP security and wireless passphrase WEPGenie Basic Settings Select Basic Attached Devices Attached Devices To view the devices that are connected to your networks Select Basic Guest Network  To set up a guest networkGuest Network Genie Basic Settings Specify custom settings Genie Advanced HomeSetup Wizard  To launch the Setup WizardGenie Advanced Home WPS Wizard  To use the WPS WizardGenie Advanced Home Select Advanced Setup WAN Setup WAN Setup To change the WAN settings Genie Advanced Home Default DMZ Server  To set up a default DMZ server Change the MTU SizeLAN IP address LAN Setup To change the MTU size  To change the LAN settings Use Router as Dhcp Server Clear the Use Router as Dhcp Server check box Set Up Address Reservation To disable the Dhcp server feature  To reserve an IP address To edit or delete a reserved address entry Genie Advanced Home Administration Manage your networkManually Update the Router Firmware  To check for new firmware and update your router To back up the router’s configuration settings Manage the Configuration FileBack Up Settings Select Advanced Administration Backup SettingsDo not interrupt the reboot process Restore Configuration Settings To restore configuration settings that you backed up Erase Configuration Settings Advanced Settings Enhance the performance of your router To change advanced settings for your wireless network Advanced Wireless SettingsAdvanced Settings for Your Wireless Network Enable or Disable Wireless Router Radio  To enable or disable the wireless router radioSet Up a Wireless Schedule  To configure and enable the wireless scheduleSet Up the WPS Settings  To change the WPS settings for your wireless networkWireless Distribution System Wireless repeating scenarioSelect Advanced Advanced Setup Wireless Repeating Function Set Up the Base Station To set up the base station Select the Enable Wireless Repeating Function check boxSet Up a Repeater Select the Wireless Base Station radio button To configure the router as a repeater Complete the Repeater IP Address fieldStatic Routes  To set up a static routeSelect Advanced Advanced Setup Static Routes Advanced Settings Universal Plug and Play  To edit or delete a static route To configure Universal Plug and Play Advanced Settings Monitoring Monitor your router and network trafficRouter Status and Usage Information Screen  To display the Router Information pane Router Information PaneInternet Port Pane LAN PortStatistics  To view the traffic statisticsDhcp connection Connection Status To view the connection status PPPoE connection Pptp connectionGuest Network Pane Wireless Settings Pane To display the Wireless Settings pane  To display the Guest Network paneMonitoring Troubleshooting Find and fix problemsQuick Tips Wireless SettingsNetwork Settings Sequence to Restart Your NetworkTroubleshoot with the LEDs Power LED Is Off or BlinkingPower LED Stays Amber Internet or Ethernet Port LEDs Are Off WiFi LED Is OffAll LEDs Remain Lit After Startup WPS Button Blinks AmberCannot Log In to the Router  To check the WAN IP address Cannot Access the InternetTroubleshoot Internet Browsing Troubleshoot a PPPoE Internet Connection  To troubleshoot a PPPoE Internet connectionChanges Not Saved Wireless ConnectivityTroubleshoot Your Network Using the Ping Utility Test the LAN Path to Your RouterTest the Path from Your Computer to a Remote Device  To ping the router from a computer running WindowsTroubleshooting Supplemental Information Additional detailsFactory Settings JNR1010v2 router factory default settingsTechnical Specifications JNR1010v2 router specifications

Related manuals

Manual 77 pages 12.78 Kb