NETGEAR Explore Features and Specifications of JNR1010v2 Router, including RIP Version and UPnP Port Mapping

JNR1010v2 N150 Wireless Router

Table 4. JNR1010v2 router factory default settings (continued)

Feature		Default Behavior
Wireless	20/40 MHz coexistence	Enabled
(continued)
	Data rate	Best
	Output power	Full

Technical Specifications

Table 5. JNR1010v2 router specifications

Feature	Description
Data and routing protocols	TCP/IP, RIP-1, RIP-2, DHCP, PPPoE, PPTP, Bigpond, Dynamic DNS, UPnP, and
	SMB
Power adapter	• North America: 120V, 60 Hz, input
	• UK, Australia: 240V, 50 Hz, input
	• Europe: 230V, 50 Hz, input
	• All regions (output): 12 VDC @ 1A, output
Dimensions	217.74 x 147.73 x 34.92 mm (8.57 x 5.81 x 1.37 in.)
Weight	0.41 kg (0.91 lb)
Operating temperature	0° to 40°C (32º to 104ºF)
Operating humidity	90% maximum relative humidity, noncondensing
Electromagnetic emissions	FCC Part 15 Class B
	VCCI Class B
	EN 55 022 (CISPR 22), Class B C-Tick N10947
LAN	10BASE-T or 100BASE-Tx, RJ-45
WAN	10BASE-T or 100BASE-Tx, RJ-45
Wireless	Maximum wireless signal rate complies with the IEEE 802.11 standard. See the
	entry for Transmission speed in Table 4 on page 90.
Radio data rates	Auto Rate Sensing
Data encoding standards	IEEE 802.11n version 2.0
	IEEE 802.11n, IEEE 802.11g, IEEE 802.11b 2.4 GHz
Maximum computers per	Limited by the amount of wireless network traffic generated by each node
wireless network	(typically 50–70 nodes)
Operating frequency range	2.412–2.462 GHz (US)
	2.412–2.472 GHz (Japan)
	2.412–2.472 GHz (Europe ETSI)
802.11 security	WEP, WPA-PSK, WPA2-PSK, WPA-PSK + WPA2-PSK mixed mode,
	WPA/WPA2 Enterprise

Supplemental Information

91