Agilent Technologies 8753ES, 8753ET manual Accessories, Calibration Kits

Accessories

Calibration Kits

Vector accuracy enhancement procedures require that the systematic errors of the measurement sys- tem be characterized by measuring known devices (standards) on the system over the frequency range of interest. Return loss specifications or typical values are provided where available for the terminations and adapters.

85031B 7-mm calibration kit

Contains precision 7-mm standards used to cali- brate the 8753ES for measurement of devices with precision 7-mm connectors.

Includes		Part number
7 mm short/open circuit		85031-60001
7 mm 50-ohm terminations:		00909-60008
(two each)
Specifications for terminations
DC to 5 GHz	RL ≥ 52 dB
5 to 6 GHz	RL ≥ 46 dB

85032B 50-ohm type-N calibration kit

Contains precision 50-ohm type-N standards used to calibrate the 8753ET/ES and 50-ohm test sets for measurement of devices with 50-ohm type-N connectors. Precision phase-matched 7-mm to type-N adapters are included for accurate meas- urements of non-insertable devices. Option 001 deletes the 7-mm to type-N adapters, which are not needed with the 8753ET.

Includes		Part number
N-male 50-ohm termination		00909-60009
N-female 50-ohm termination		00909-60010
N-male short circuit		85032-60008
N-female short circuit		85032-60009
N-female open circuit		85032-60012
N-male open circuit		85032-60007
7-mm to N-male adapter		85054-60009
(two each)
7-mm to N-female adapter		85054-60001
(two each)
Specifications for terminations:
DC to 3 GHz	RL ≥ 49 dB
2 to 3 GHz	RL ≥ 46 dB
3 to 6 GHz	RL ≥ 40 dB
Typical adapter characteristics:
DC to 6 GHz	RL ≥ 30 dB

85033D 3.5-mm calibration kit

Contains a set of precision 3.5-mm standards to calibrate the 8753ES and 50-ohm test sets for the measurement of devices with precision 3.5-mm and SMA connectors. Precision phase-matched

7-mm to 3.5-mm adapters are included for accurate measurements of non-insertable devices. Option 001 deletes the 7-mm to type-N adapters.

Includes	Part number
3.5-mm-male 50-ohm termination	85033-60009

3.5-mm-female 50-ohm termination 85033-60010

3.5-mm-female short		85033-60014
3.5-mm-male short		85033-60013
3.5-mm-female open		85033-60012
3.5-mm-male open		85033-60011
7-mm to 3.5-mm female adapter		1250-1747
(two)
7-mm to 3.5-mm male adapter		1250-1746
(two)
Specifications for terminations:
DC to 1.3 GHz	RL ≥ 46 dB
1.3 to 3 GHz	RL ≥ 44 dB
3 to 6 GHz	RL ≥ 38 dB
Typical adapter characteristics:
DC to 6 GHz	RL ≥ 34 dB

85036B 75-ohm type-N calibration kit

Contains a set of precision 75-ohm type-N stan- dards to calibrate the 8753ES with a 75-ohm test set for measurement of devices with 75-ohm type-N connectors. Precision phased-matched adapters are included for accurate measurements of non- insertable devices.

Includes		Part number
N-male 75-ohm termination		00909-60019
N-female 75-ohm termination		00909-60020
N-female 75-ohm short		85036-60011
N-male 75-ohm short		85036-60012
N-female open		85032-20001
N-male open		85032-60007
N-male to N-male 75-ohm adapter		85036-60013
N-female to N-female 75-ohm		85036-60014
adapter
N-male to N-female 75-ohm		85036-60015
adapter
Specifications for terminations:
DC to 2 GHz	RL ≥ 46 dB
2 to 3 GHz	RL ≥ 40 dB

24