Verification Kits

Accessories

Measuring known devices other than the standards used in calibration is an easy way to verify the proper operation of an 8753ES measurement sys- tem. Agilent offers verification kits which include devices, with data, for verifying the error-corrected measurements of an 8753ES and 50-ohm test sets.

85029B 7-mm verification kit

Contains a set of precision 7-mm devices, with data traceable to NIST* for verifying the calibrated performance of an 8753E measurement system. The 85031B 7-mm calibration kit is required for complete verification.

Test-Port Return Cables

Agilent offers high-quality RF cables to connect the 8753ET/ES and test sets to devices under test. These cables offer excellent RF shielding for high- dynamic-range measurements.

11851B 50-ohm type-N RF cable kit

Recommended for use with the 11850C/D three-way power splitters. Kit includes three phase-matched 610-mm (24-in.) cables and one 860-mm (34-in.) cable.

Return loss	>24 dB to 3 GHz
Phase tracking	±4° at 1.3 GHz

8120-5639 50-ohm type-N RF cable A 50-ohmtype-Ntest-port cable (both connectors are type-N male).

Return loss>30dB to 6 GHz

11857B 75-ohm type-N test-port return cables

A pair of 610-mm (24-in.) test-port return cables for use with the 8753ES or 85046B 75-ohm

S-parameter test set.
Return loss	>24 dB to 2 GHz
Phase tracking	±2° at 1.3 GHz

11857D 7-mm test-port return cables

A pair of 610-mm (24-in.) test-port return cables for use with the 8753ES with the 85046A and 85047A S-parameter test sets. These cables can be used with connector types other than 7-mm with the appropriate precision adapters.

Return loss	>24 dB to 3 GHz
	>20 dB to 6 GHz
Phase tracking	±2° at 1.3 GHz

11857F type-F test-port return cables

Type-F test-port cable set (75-ohm). Includes one cable with type-N(male) to type-F(male) connectors and one cable with type-N(male) to type-F(female) connectors.

11850C/D three-way power splitters
	11850C		11850D
Impedance	50 ohms		75 ohms
Frequency range	DC to 3 GHz		DC to 2 GHz
Tracking	±25 dB, ±3°		±2 dB, ±2.5°
Equivalent source	30 dB at 1.3 GHz		30 dB at 1.3 GHz
match
(ratio or leveling)	20 dB at 3 GHz		20 dB at 2 GHz
Nominal	9.5 dB + 1 dB/GHz		7.8 dB
insertion loss
Input port match
DC to 1.3 GHz	20 dB		20 dB
1.3 GHz to Fmax	10 dB		10 dB
Maximum operating	+20 dB		+20 dB
level
Damage level	+30 dB		+30 dB
RF connectors
RF input	50-ohm type-N (f)		50-ohm type-N(f)
All others	50-ohm type-N (f)		75-ohm type-N(f)
Includes	Three 11852B 50- to 75-ohm
	minimum-loss pads
Recommended	11851B RF cable kit
accessories
11667A 50-ohm power splitter
Frequency range		DC to 18 GHz
Typical insertion loss		6 dB
Equivalent source match
DC to 4 GHz		26 dB
4 GHz to 8 GHz		21 dB
8 GHz to 18 GHz		17 dB
Tracking (between output arms)
DC to 4 GHz		±15 dB
4 GHz to 8 GHz		±2 dB
8 GHz to 18 GHz		±25 dB
Maximum operating level		±27 dBm
Connectors		50-ohm type-N (f)
Option 001
RF input		type-N (m)
Outputs		type-N (f)
Option 002
RF input		type-N (f) on RF
Outputs		precision 7-mm
Dimensions		46 mmH x 52 mm W x19 mm D
		(1.8 x 2.0 x 0.7 in)
Recommended accessories		11851B RF cable kit
11852B 50-ohm to 75-ohm minimum loss pad
Frequency range		DC to 3.0 GHz
Nominal insertion loss		5.7 dB
Return loss
300 kHz to 2 GHz		32 dB
2 GHz to 3 GHz		27 dB
Maximum input power		250 mW (+24 dBm)

Agilent Technologies 8753ES, 8753ET manual Verification Kits, Test-Port Return Cables

Accessories