Agilent Technologies 8753ET, 8753ES manual Phase Characteristics, Magnitude Characteristics

External source mode1 (CW time sweep only)

Frequency range	300 kHz to 6 GHz
R-channel input requirements (typical)
Power level	0 to -25 dBm
Spectral purity
Maximum	<-30 dBc
spurious input
Residual FM	<20 kHz
Typical settling time	500 ms (automatic)
	50 ms (manual)
Frequency readout accuracy	0.1% (automatic)
Input frequency accuracy requirement2
Manual	-0.5 to 5 MHz
Accuracy	(see magnitude and phase
	characteristics)

Reference level
Range	±500 dB
Resolution	0.001 dB
Stability2
30 kHz to 3 GHz	0.02 dB/° C
3 GHz to 6 GHz	0.04 dB/° C

Phase Characteristics

Dynamic accuracy	(10 Hz IF BW)
Range	±180°

Magnitude Characteristics

Dynamic accuracy (10 Hz IF BW)

		Display resolution	0.01°/division
		Marker resolution3	0.01°
		Trace noise
		(+5 dBm at test-port, ratio measurement, 3 kHz BW)
		300 kHz to 3 GHz	<0.038° rms
		3 GHz to 6 GHz	<0.070° rms
Display resolution	0.001 dB/division	Reference level
Marker resolution3	0.001 dB	Range	-180° to +180°
Trace noise		Resolution	0.01°
(+5 dBm at test-port, ratio measurement, 3 kHz BW)		Stability
300 kHz to 3 GHz	<0.006 dB rms	30 kHz to 3 GHz	0.05°/° C
3 GHz to 6 GHz	<0.010 dB rms	3 GHz to 6 GHz	0.20°/° C
		Polar characteristics
		Range	10 x 10–12to 1000 units
1. See the Agilent 8753ES descriptions and options for a functional description.			full scale
		Reference	±500 units
Measurement accuracy is dependent on the stability of the input signal.

2.Typical performance.

3.Marker resolution for magnitude; phase and delay is dependent upon measured

value. Resolution is limited to five digits. 11