Olympus DS-7000 manual Menu items, LCD/Sound Menu, Adjust the start/stop actuation level, Items

Page 38

Menu items

•When the sound volume is lower than the preset actuation sound level, recording automatically stops after 1 second approximately, and [Standby] flashes on the display. The record indicator light turns on when recording starts and flashes when recording pauses.

LCD/Sound Menu

Backlight

By default, the display will remain lit for about

10 seconds when a button on the recorder is pressed.

3

Menu

a VCVA indicator

b Level meter (varies according to the sound volume being recorded)

a

b

1Select [Lighting Time], [Dim Light Time] or [Brightness].

2Select the options.

When [Lighting Time] is selected:

[5seconds] [10seconds] [30seconds] [1minute]: Set the backlight duration.

When [Dim Light Time] is selected:

[30seconds] [1minute] [2minutes] [5minutes] [Always On]:

Set the time after which the backlight dims.

items

EN

38

Adjust the start/stop actuation level:

While the recorder is in recording mode, press the 9or 0button to adjust the actuation level.

•The VCVA level can be set to any of 15 different values.

•The higher the value is, the more sensitive the recorder can react to sounds. At the highest value, even the faintest sound will activate recording.

•The VCVA actuation level can be adjusted according to the ambient (background) noise.

C Start level (moves to the right/left according to the set level)

c

•The start/stop actuation level also varies depending on the selected microphone sensitivity mode (☞ P.37).

•To ensure successful recordings, prior testing and adjustment of the start/stop actuation level is recommended.

When [Brightness] is selected: [01] [02] [03]:

Sets the brightness of the backlight when lit.

LED

You can set it so the record indicator light does not turn on.

[On]:

LED light will be set. [Off]:

LED light will be canceled.

Beep

When the Beep is set to [On], the recorder will beep in case of error.

[On]:

Beep is enabled. [Off]:

Beep is disabled.

Language (Lang)

You can set the language for the recorder’s user interface.

[Česky] [Dansk] [Deutsch] [English] [Español] [Français] [Nederlands] [Polski] [Русский] [Svenska]:

•The languages available may vary depending on the country/region where the product is purchased.

Image 38

Contents Instructions Thank you for purchasing an Olympus Digital Voice RecorderIntroduction Trademarks and registered trademarksTable of contents Word card is used to refer to the SD card and microSD card Safety precautionsConvention used in this manual Keep young children and infants away from the recorder Safety precautionsHandling the recorder Do not operate the unit while operating a vehicleKeep battery out of the reach of children Battery handling precautionsNever heat or incinerate battery Dispose of the used battery following the instructionsDo not moisten the AC adapter or touch it with a wet hand Docking stationAC adapter Case LCD monitorMemory Card Noise, heat, smoke, or a burning odorAuthentication system via password Main featuresMain features Large color LCD displayIdentification of parts Display status indicators LCD panel Identification of partsThen close the battery cover Inserting the batteryInserting the battery Battery indicatorCharging directly via USB cable Charging the batteryCharging the battery using the docking station Connect the USB cable to the recorderRecommended temperature range of use During operation Charging the batteryUsing the lithium ion battery ChargingUsing the USB cable Power supply from AC adapter or USB cableUsing the AC adapter CableTurning on the recorder/ Memory card Memory cardCompatible cards Cards compatibilityMemory card Memory cardInserting and ejecting a SD card Press the OK/MENU button to complete the setting Setting time and date Time & DateSetting time and date Press the 9or 0button to select the item to setChanging the time and date Setting time and dateSetting time and date Press the F3 Exit button to close the menu screenRecording By default, the recorder has five folders, A, BRecording related settings RecordingPress the NEW button to create a new file RecordingNew recording Overwrite recording Select and play the file you want to overwriteInsert recording Insert Rec? will appear on the displayRecording monitor Select the file, then move the slide Volume can be adjusted within a range from 00 toPlayback Beginning of the previous file PlaybackAt the end of the file F.Skip Can be set to On or Off P.39Erasing ErasingErasing files Erase in FolderAny unnecessary part of a file can be erased ErasingPartially erasing a file Press the Erase button to confirm the erasure Display changes to Partial erasing ! Erasing will startFolder list screen will be displayed 9, 0buttonChanging folders Selecting a fileDevice lock function Authentication halt modeDevice lock function Turn on the recorder Setting the Author ID and Work TypeSetting the Author ID and Work Type While the recorder is in stop mode, press the NEW buttonVerbal Comment When playing a Verbal Comment, press the Erase buttonWhen playing back a file, press and hold the 9or 0button Verbal CommentF3 Index button Index marksIndex marks While playing back a file, press and hold the 9or 0buttonPress the + or − button to move to How to use the menuHow to use the menu Item you want to setLCD/Sound Menu Backlight How to use the menuMenu list BeepRec Menu Menu itemsFile Menu Select OnLCD/Sound Menu Adjust the start/stop actuation levelMenu items ItemsDevice Menu Select Sound or SpeedEditing the Work Type information Entering charactersMaximum entered character count Press the F2 Finish buttonMoving the entry column Formatting the card Format Done displays when formatting endsFormatting the card Format Formatting the card Formatting the cardCustomizing the recorder Programmable Buttons Customizing the recorderDevice Folders Hands FreeOdms software Windows Odms and DSS Player softwareMinimum requirement Player software Using online helpOdms and DSS Player software DSS Player software MacintoshConnecting to your PC Connecting to your PC using the USB cableDisconnecting from your PC Connecting to your PCConnecting to your PC using the docking station Connecting to your PCAlarm message list Alarm message list Message Explanation ActionTroubleshooting TroubleshootingSymptom Probable cause Action Troubleshooting Troubleshooting Symptom Probable cause ActionAccessories optional Specifications For customers in Europe Technical assistance and supportFor customers in North and South America Technical assistance and supportOlympus Imaging America INC