Olympus DS-7000 manual Connecting to your PC using the USB cable

Page 48

Connecting to your PC

Connecting to your PC using the USB cable

4

Connecting to your PC

EN

48

1Boot the PC.

2Connect the USB cable to the USB port of the PC.

3Connect the USB cable to the connecting terminal on the bottom of the recorder.

• [Remote (Composite)] is displayed on the recorder if the USB cable is

connected.

After connecting the recorder to your PC, it will be powered through the USB cable.

When connected to a PC, the SD card and the microSD card will be recognized from the PC as separated removable disk drives.

Notes

•NEVER remove the card or disconnect the USB cable while the record indicator light is flashing. If you do, the data will be destroyed.

•Some PC’s may not supply sufficient power and the recorder fails to connect. Refer to your PC user’s manual regarding the USB port on your PC.

•Do not connect the recorder to a PC by using a USB hub. Make sure to connect to a USB port on your PC.

•Make sure to push the cable connector all the way in. Otherwise, the recorder may not operate properly.

Image 48

Contents Instructions Thank you for purchasing an Olympus Digital Voice RecorderIntroduction Trademarks and registered trademarksTable of contents Safety precautions Convention used in this manualWord card is used to refer to the SD card and microSD card Safety precautions Handling the recorderKeep young children and infants away from the recorder Do not operate the unit while operating a vehicleBattery handling precautions Never heat or incinerate batteryKeep battery out of the reach of children Dispose of the used battery following the instructionsDocking station AC adapterDo not moisten the AC adapter or touch it with a wet hand LCD monitor Memory CardCase Noise, heat, smoke, or a burning odorMain features Main featuresAuthentication system via password Large color LCD displayIdentification of parts Display status indicators LCD panel Identification of partsInserting the battery Inserting the batteryThen close the battery cover Battery indicatorCharging the battery Charging the battery using the docking stationCharging directly via USB cable Connect the USB cable to the recorderCharging the battery Using the lithium ion batteryRecommended temperature range of use During operation ChargingPower supply from AC adapter or USB cable Using the AC adapterUsing the USB cable CableMemory card Compatible cardsTurning on the recorder/ Memory card Cards compatibilityMemory card Inserting and ejecting a SD cardMemory card Setting time and date Time & Date Setting time and datePress the OK/MENU button to complete the setting Press the 9or 0button to select the item to setSetting time and date Setting time and dateChanging the time and date Press the F3 Exit button to close the menu screenBy default, the recorder has five folders, A, B Recording related settingsRecording RecordingRecording New recordingPress the NEW button to create a new file Overwrite recording Select and play the file you want to overwriteInsert recording Insert Rec? will appear on the displayRecording monitor Volume can be adjusted within a range from 00 to PlaybackSelect the file, then move the slide Playback At the end of the file F.SkipBeginning of the previous file Can be set to On or Off P.39Erasing Erasing filesErasing Erase in FolderErasing Partially erasing a fileAny unnecessary part of a file can be erased Press the Erase button to confirm the erasure Display changes to Partial erasing ! Erasing will start9, 0button Changing foldersFolder list screen will be displayed Selecting a fileAuthentication halt mode Device lock functionDevice lock function Setting the Author ID and Work Type Setting the Author ID and Work TypeTurn on the recorder While the recorder is in stop mode, press the NEW buttonWhen playing a Verbal Comment, press the Erase button When playing back a file, press and hold the 9or 0buttonVerbal Comment Verbal CommentIndex marks Index marksF3 Index button While playing back a file, press and hold the 9or 0buttonHow to use the menu How to use the menuPress the + or − button to move to Item you want to setHow to use the menu Menu listLCD/Sound Menu Backlight BeepMenu items File MenuRec Menu Select OnAdjust the start/stop actuation level Menu itemsLCD/Sound Menu ItemsDevice Menu Select Sound or SpeedEditing the Work Type information Entering charactersPress the F2 Finish button Moving the entry columnMaximum entered character count Format Done displays when formatting ends Formatting the card FormatFormatting the card Formatting the card Formatting the cardCustomizing the recorder Customizing the recorder Device FoldersProgrammable Buttons Hands FreeOdms and DSS Player software Minimum requirementOdms software Windows Using online help Odms and DSS Player softwarePlayer software DSS Player software MacintoshConnecting to your PC Connecting to your PC using the USB cableConnecting to your PC Connecting to your PC using the docking stationDisconnecting from your PC Connecting to your PCAlarm message list Alarm message list Message Explanation ActionTroubleshooting Symptom Probable cause ActionTroubleshooting Troubleshooting Troubleshooting Symptom Probable cause ActionAccessories optional Specifications Technical assistance and support For customers in North and South AmericaFor customers in Europe Technical assistance and supportOlympus Imaging America INC