Olympus DS-7000 Connecting to your PC using the docking station, Disconnecting from your PC

Page 49

Connecting to your PC

Connecting to your PC using the docking station

Place the recorder in the docking station

1Connect the USB cable to the USB port of the PC.

2Connect the USB cable to the docking station as shown in the illustration.

3Set the recorder in the docking station.

•[Remote (Composite)] is displayed on the recorder if the USB cable is connected.

•If the AC adapter is connected as well, power will be supplied from the AC adapter.

Disconnecting from your PC

Windows

1Click [] on the task bar located at the lower-right corner of the screen. Click [Safely remove USB Mass Storage Device].

• The drive letter will differ depending on the PC being used.

2Confirm that the record indicator light turns off before disconnecting the USB cable.

Macintosh

1Drag and drop the recorder’s drive icon for this recorder displayed on the desktop to the Recycle Bin icon.

2Confirm that the record indicator light turns off before disconnecting the USB cable.

Notes

•NEVER remove the card or disconnect the USB cable while the record indicator light is flashing. If you do, the data will be destroyed.

•Never touch the contact points at the bottom of the docking station, as that may cause bad connection.

•With a PC connected, the recorder cannot be operated with the Foot Switch. When connecting the recorder to a PC via the docking station, remove the Foot Switch.

4

Connecting to your PC

EN

49

Image 49

Contents Thank you for purchasing an Olympus Digital Voice Recorder InstructionsTrademarks and registered trademarks IntroductionTable of contents Convention used in this manual Safety precautionsWord card is used to refer to the SD card and microSD card Handling the recorder Safety precautionsKeep young children and infants away from the recorder Do not operate the unit while operating a vehicleNever heat or incinerate battery Battery handling precautionsKeep battery out of the reach of children Dispose of the used battery following the instructionsAC adapter Docking stationDo not moisten the AC adapter or touch it with a wet hand Memory Card LCD monitorCase Noise, heat, smoke, or a burning odorMain features Main featuresAuthentication system via password Large color LCD displayIdentification of parts Identification of parts Display status indicators LCD panelInserting the battery Inserting the batteryThen close the battery cover Battery indicatorCharging the battery using the docking station Charging the batteryCharging directly via USB cable Connect the USB cable to the recorderUsing the lithium ion battery Charging the batteryRecommended temperature range of use During operation ChargingUsing the AC adapter Power supply from AC adapter or USB cableUsing the USB cable CableCompatible cards Memory cardTurning on the recorder/ Memory card Cards compatibilityInserting and ejecting a SD card Memory cardMemory card Setting time and date Setting time and date Time & DatePress the OK/MENU button to complete the setting Press the 9or 0button to select the item to setSetting time and date Setting time and dateChanging the time and date Press the F3 Exit button to close the menu screenRecording related settings By default, the recorder has five folders, A, BRecording RecordingNew recording RecordingPress the NEW button to create a new file Select and play the file you want to overwrite Overwrite recordingInsert Rec? will appear on the display Insert recordingRecording monitor Playback Volume can be adjusted within a range from 00 toSelect the file, then move the slide At the end of the file F.Skip PlaybackBeginning of the previous file Can be set to On or Off P.39Erasing files ErasingErasing Erase in FolderPartially erasing a file ErasingAny unnecessary part of a file can be erased Display changes to Partial erasing ! Erasing will start Press the Erase button to confirm the erasureChanging folders 9, 0buttonFolder list screen will be displayed Selecting a fileDevice lock function Authentication halt modeDevice lock function Setting the Author ID and Work Type Setting the Author ID and Work TypeTurn on the recorder While the recorder is in stop mode, press the NEW buttonWhen playing back a file, press and hold the 9or 0button When playing a Verbal Comment, press the Erase buttonVerbal Comment Verbal CommentIndex marks Index marksF3 Index button While playing back a file, press and hold the 9or 0buttonHow to use the menu How to use the menuPress the + or − button to move to Item you want to setMenu list How to use the menuLCD/Sound Menu Backlight BeepFile Menu Menu itemsRec Menu Select OnMenu items Adjust the start/stop actuation levelLCD/Sound Menu ItemsSelect Sound or Speed Device MenuEntering characters Editing the Work Type informationMoving the entry column Press the F2 Finish buttonMaximum entered character count Formatting the card Format Format Done displays when formatting endsFormatting the card Formatting the card Formatting the cardCustomizing the recorder Device Folders Customizing the recorderProgrammable Buttons Hands FreeMinimum requirement Odms and DSS Player softwareOdms software Windows Odms and DSS Player software Using online helpPlayer software DSS Player software MacintoshConnecting to your PC using the USB cable Connecting to your PCConnecting to your PC using the docking station Connecting to your PCDisconnecting from your PC Connecting to your PCAlarm message list Message Explanation Action Alarm message listSymptom Probable cause Action TroubleshootingTroubleshooting Troubleshooting Symptom Probable cause Action TroubleshootingAccessories optional Specifications For customers in North and South America Technical assistance and supportFor customers in Europe Technical assistance and supportOlympus Imaging America INC