8. Help
8.5.2When the recording paper is not fed into the unit properly
The display will show the following.
FAILED PICK UP
1Pull the tension plate forward (1), then remove the paper tray cover (2). Remove the recording paper (3).
2Hold the centre part of the front cover (1), and pull open the inner cover (2).
1 2
23 1
3
LDo not touch the transfer roller (3).
3Remove the jammed document carefully (1).
2
L Before
8.6Document jams - sending
1 Lift open the front cover (1), holding OPEN (2).
1
2
3
Caution:
The fuser unit (3) gets hot. Do not touch it.
1
4Push back the inner cover.
5Close the front cover (1) by pushing down on both sides, until locked.
1
57