Panasonic KX-F1000AL, KX-F1100AL manual Remote fax receiving using an extension, Using an extension

8. Advanced Operations

Remote fax receiving using an extension

If you have an extension phone on the same line, it is possible to receive a fax message to your facsimile unit.

Using the extension phone, dial the remote fax activation code.

This saves you from going to the facsimile unit and pressing (START/SET).

Important:

ÁTo activate this feature, use a touch tone telephone as the extension phone. ÁThe remote fax activation code is set to “U9” as a preselected setting.

Using an extension

	When a call is received, lift the handset of the
1 extension phone.
2	When:
	—document reception is required, or
	—a slow beep is heard, or
	—no sound is heard,
	press *9 (remote fax activation code).

3 Replace the handset.

ÁThe facsimile unit will activate the fax function to receive documents.

To the same line

Extension phone

Changing the remote fax activation code

This code can be from 2 to 4 digits in length using the numbers 0 through 9 and the character *.

Important

ÁThis code should not be set to “0000”.

ÁThe remote fax activation code must be different from the first 2 digits of a remote ANS ID (page 57), a mailbox password (page 53), a remote TAM activation ID (page 25) and a junk mail prhibitor ID (page 43).

1

2

3

4

5

6

Press (MENU).

SYSTEM SET UP

Press K, then DA.

REMOTE FAX ACT.

Press (START/SET).

CODE=U9

Enter the new code number.

Press (START/SET).

Press (MENU).

(MENU)

Dial keypad (START/SET)

Note:

Some special telephone company services will require you to press a service access code. If you subscribe to such services, the whole or part of the remote fax activation code must be different from the service access code.

42