AEG Thyro-S H1 Input and output data Thyro-Measurement Unit, Tab b Status TPM, TSC, TIO, TMU

6.8 Input and output data Thyro-Measurement Unit

Tab. 25 Cyclic input and output data TMU mode

Offset	Input data, actual values	Data type	Size	Unit
0	AC input 1	float	4	[A],[V]
4	AC input 2	float	4	[A],[V]
8	AC input 3	float	4	[A],[V]
12	Power	float	4	[W]
16	Energy	float	4	[kWh]
20	DC input 1	integer	2	4096=100%
22	DC input 2	integer	2	4096=100%
24	DC input 3	integer	2	4096=100%
26	Mains voltage	integer	2	[V]
28	Period duration	integer	2	[μs]
30	Temperature	integer	2	[°C]
32	Fault (see table 25b)	integer	2	-
34	Status (see table 25b)	integer	2	-

Tab. 25b Status TPM, TSC, TIO, TMU

Description	Bit	Fault LED, fault output*
Frequency measurement outside of 47Hz to 63Hz	Bit 0	on
SYNC error, no cero crossing within the gate	Bit 1	on
Temperature max. limit has been exceeded	Bit 2	on
Temperature min. limit has been exceeded	Bit 3	on
One or more parameters outside the limits	Bit 4	on
Mains voltage lower than lower voltage limit	Bit 5	on

Tab. 25b Fault TPM, TSC, TIO, TMU

Description	Bit	Alarm LED, alarm output*
Mains frequency is 60Hz	Bit 2	off
Transformer 1 fallen below min. limit	Bit 3	on
Transformer 1 exceeded max. limit	Bit 4	on
Transformer 2 fallen below min. limit	Bit 5	on
Transformer 2 exceeded max. limit	Bit 6	on
Transformer 3 fallen below min. limit	Bit 7	on
Transformer 3 exceeded max. limit	Bit 8	on
Device switched off	Bit 9	--
Wrong device	Bit 10	--
Bus module active (0=no bus module / 1=bus module	Bit 11	off
active)
* Default setting can be parameterized.

25