AEG Thyro-S H1 manual Tab Cyclic input and output data with Thyro-A 1A...C05

Tab. 18 Cyclic input and output data with Thyro-A 1A...C05

Offset	Input data, actual values	Data type	Size	Unit
0	Load voltage phase 1	float	4	[V]
4	Load current phase 1	float	4	[A]
8	Load current phase 2	float	4	[A]
12	Total load current	float	4	[A]
16	Power phase 1	float	4	[W]
20	Power phase 2	float	4	[W]
24	Total power	float	4	[W]
28	Mains voltage L1	integer	2	[V]
30	Switch-on angle alpha phase 1	integer	2	[0.01 °el]
32	Total setpoint	integer	2	4096=100%
34	Fault (see table 14b)	integer	2	-
36	Status (see table 14b)	integer	2	-
Offset	Output data, setpoint	Data type	Size	Unit
0	Master setpoint	integer	2	4096=100%

Tab. 19 Cyclic input and output data with Thyro-A 1A...C07

Offset	Input data, actual values	Data type	Size	Unit
0	Load voltage L1	float	4	[V]
4	Load current L1	float	4	[A]
8	Power L1	float	4	[W]
12	Mains voltage L1	integer	2	[V]
14	Load temperature	integer	2	[°C]
16	Switch-on angle alpha	integer	2	[0.01 °el]
18	Total setpoint	integer	2	4096=100%
20	Fault (see table 14b)	integer	2	-
22	Status (see table 14b)	integer	2	-
Offset	Output data, setpoint	Data type	Size	Unit
0	Master setpoint	integer	2	4096=100%

Supported operating modes TPM; TSC; TMU

With the Thyro-Power Manager, Thyro-Step Controller and Thyro-Measurement Unit the input and output data are depend on the operating mode. The following table shows which operating mode the devices support.

Tab. 20 Supported operating modes

	TPM		TSC	TIO	TMU
	automatic	manual
Thyro-Power Manager	X	X	X	X	X
Thyro-Step Controller	-	-	X	X	X
Thyro-Measurement Unit	-	-	-	X	X

22