AEG Thyro-S H1 manual Input and output data Thyro-A, Tab b Thyro-S Status

Tab. 5b Thyro-S Status

Description	Bit	LEDs	Relay
Pulse inhib active	Bit 0	none	open
(bridge X2.1-X2.2 open)	Bit 0	none	open
Mains frequency is 60Hz	Bit 2	none	open
Relay status	Bit 8	none	open
(0=relay off / 1=relay on)	Bit 8	none	open
Device switched off	Bit 9	--	closed
Wrong device	Bit 10	--	----
Bus module active	Bit 11	none	----
(0=no bus module / 1=bus module active)
Thyristor short-circuit	Bit 14	Test LED and Load Fault LED	----
		flashing alternately slowly

6.4 Input and output data Thyro-A

Tab. 6 Cyclic input and output data with Thyro-A 1A...H1

Offset	Input data, actual values	Data type	Size	Unit
0	Load voltage L1	float	4	[V]
4	Mains voltage L1	integer	2	[V]
6	Switch-on time TS	integer	2	[period]
8	Switch-on angle alpha	integer	2	[0.01 °el]
10	Total setpoint	integer	2	4096=100%
12	Fault (see table 14b)	integer	2	-
14	Status (see table 14b)	integer	2	-
Offset	Output data, setpoint	Data type	Size	Unit
0	Master setpoint	integer	2	4096=100%

Tab. 7 Cyclic input and output data with Thyro-A 1A...HRL1

Offset	Input data, actual values	Data type	Size	Unit
0	Load voltage L1	float	4	[V]
4	Load current L1	float	4	[A]
8	Mains voltage L1	integer	2	[V]
10	Switch-on time TS	integer	2	[period]
12	Switch-on angle alpha	integer	2	[0.01 °el]
14	Total setpoint	integer	2	4096=100%
16	Fault (see table 14b)	integer	2	-
18	Status (see table 14b)	integer	2	-
Offset	Output data, setpoint	Data type	Size	Unit
0	Master setpoint	integer	2	4096=100%

16