Clearing Advanced Call Router History Data
To open the Datasource dialog box,
To build a SQL query:
1.Enter User Name and Password information for the database.
2.Enter information for the database you are querying against. For example:
DSN - BankAccount
Table Name - AccountBalance
Matched Field Name - CustomerPhoneNumber Matched Field Data Type - char
Note: as you build the query, the SQL query sentence will appear in the window at the bottom.
3.Specify the condition for this query.
a.Select the Caller Match Item data for this query - Caller ID, IVR Path, DNIS, Item name or IVR data.
b.Add any additional condition. For example Where - && Balance>1000
4.Click OK. You will be returned to the Rule dialog box, where the SQL query will be shown in the Data column and the database will be shown in the DSN column.
Queue Announcements
You can use Advanced Call Router to inform callers of their position in a workgroup queue. There are two requirements:
1.In Call Router, you must create a rule with Target action “Play WG Queue Status.” In addition, enter an Item Name that matches the name of the Auto Attendant’s “Advanced Call Routing” name. The workgroup extension information you specify in the rule must also be entered when Call Router logs on in the Monitor window. Thus, it is a requirement to use the same virtual agent extension if you are writing several different queue announcement rules.
2.In AltiWare Administrator, you must configure one of the Auto Attendant numbers to which Call Router is assigned to “Advanced Call Router.” 1) Enter the same “Item Name” you use in the rule discussed