ADC H4TU-C-319 List 1 Line Unit, HDSL4 user manual Press this key, Menu Functions

LTPH-UM-1031-03, Issue 3 Provisioning

Most VT100 emulation programs support a print screen option. For Windows-based programs, such as Procomm or HyperTerminal, refer to the Help menu for instructions.

Menu bar

Monitor Performance Event Log Config Inventory Report Rlogon Help

+	------------------------------------------		+
	ADC DSL Systems, Inc.
		HDSL4
	Voice:	800.638.0031
	Fax :	714.730.2400
+	------------------------------------------		+

	ID: xxxx--xxxx--xxxx—-xxxx			02/01/2002 12:30:01	H4TU-C	System: OK___
		Circuit ID		Date and Time	Logon Device	System Status
				Figure 3. Logon Screen
			Table 4. Logon Screen Menus
Press this key:			To access this menu:	Menu Functions
M			Monitor	Monitors loopbacks and alarms, and provides a graphical representation
				of circuit activity, including ES, UAS, SES, and line code.
P			Performance	Provides performance and alarm histories for current, 25-hour, 48-hour,
				or 31-day periods for either the DS1 or HDSL4 interface.
E			Event Log	Identifies the 100 most recent system events and reports the date and
				time of occurrence.
C			Config	Provides standard configuration options, ADC options, BER tester
				(BERT), date and time setting, and a reset option (factory settings). Also
				provides a master clear option that clears all performance, alarm, and
				event log entries. Selecting the Config menu after a remote logon displays
				the BERT Generator menu, which provides access to the BERT Signal
				Generator configuration submenu.
I			Inventory	Provides product information about the various devices that are in the
				system and lists circuit and device identifications.
O			Report	Provides four types of reports: Full Report, Short Report, System
				Information Report, and Event Report.

Continued

H4TU-C-319 List 1 September 12, 2003 13