Extron electronic IPL T PCS4i manual Installation Rear Panels, Installation Overview

Page 10

Installation and

Rear Panels

This section contains installation and cabling instructions for the PCS4. The following topics are discussed:

•Installation Overview

•Rear Panels

•Setting Up the LAN Port

•Connecting the Devices

Installation Overview

To install and set up an IPL T PCS4 interface, follow these steps:

1.Turn off all of the equipment. Make sure that the video sources (DSS, cable boxes, or other devices), the IPL interface, the output devices (monitors, VCRs, projectors, and so on), and the controller are all turned off and disconnected from the power source.

2.If desired, mount the PCS4 interface (see “Mounting the IPL T PCS4 Interface” in the “Reference Material” section).

3.Plug the PCS4 power cord into an AC outlet. For the 120 VAC version, use the supplied 14 AWG IEC power cord (part number 27-407-01).

4.Connect an active LAN Ethernet cable to the RJ-45 port on the rear panel to establish a link to the network.

5.Set up an IP address for the PCS4 (see “HTML Configuration and Control” or “SIS Programming and Control”).

6.Plug the desired devices into the power receptacles on the PCS4 rear panel.

7.Press the front panel buttons to power on the receptacles.

8.Turn on the output devices.

9.Configure the PCS4 interface through the front panel, Telnet, or the web pages, then access the unit using an Internet browser.

IPL T PCS4 • Installation and Rear Panel

4

Image 10

Contents IPL T PCS4 IPL T PCS4iSafety Instructions English FCC Class a Notice Conventions Used in this Guide Software CommandsNotifications Contents IPL T PCS4 Contents About this Guide FeaturesIntroduction About the IPL T PCS4Application Diagrams IPL T PCS4Connection Diagram for IPL T PCS4i Installation Rear Panels Installation OverviewRear Panels IPL T PCS4i Rear Panel 220 VACConfiguring the LAN Port Setting Up the LAN PortConnecting the Devices LAN Port CablingIPL T PCS4 Installation and Rear Panel Front Panel Features Operation Front Panel FeaturesSetting Up Power Control Setting Up the System Using the Front PanelSetting Power Level Reference Thresholds Setting the Full power threshold None and Not Set thresholds If the receptacle Is set to Power level Receptacle FullStandby Grouping Receptacles Front panel Security Lockout Executive ModeLED lit Group Red power LED lit Group Clearing thresholdsActivation Resetting the UnitMode ResultHold the Reset button in until the Power LED blinks once Configuring the Hardware Configuration ControlSetting Up the Computer Using ARP ARP-S Command Screen Setting Up the Computer Using a Web Browser Screen Showing the Ping CommandSetting up the computer for IP communication Subnet mask Default gateway Blank or Configuring the IPL T PCS4 using a web browser Example of a Default System SettingsUsing the Embedded Web Pages Password Prompt WindowViewing the System Status System Status WebSpecifying system settings ConfigurationIP settings Date and time settings To assign passwords Assigning passwordsRemoving passwords Entering e-mail addresses for alerts Mail Alerts Screen Upper PortionUpgrading firmware Managing receptaclesSwitching power to receptacles on and off Grouping receptaclesMonitoring the receptacles and setting the alarm Monitoring Settings sectionAlarm Relay Settings section Scheduling power to receptacles Scheduling an individual receptacleScheduling receptacles by day of the week All receptacles on and offOne receptacle, power on or off File ManagementAdding a directory Uploading files to the webOther file management functions Server Side Includes SSIs Custom Web PagesQuery Strings Example of a Query String Command Code exampleURL Encoding Browser View of Previous Html Source CodeUnsafe characters Reserved charactersCharacters Hex Dec Accessing and Using Telnet Port Device Power ControlCustom Web Pages Troubleshooting Power ConnectionsSuccessful Ping Command Response Network ConnectionsDownloading Global Configurator Software Host-to-Interface Communication SIS Programming ControlMessages Initiated by the IPL T PCS4 Error Responses Password InformationError Response References Using the Command and Response Table Telnet Web BrowserSymbol Definitions ExampleX5@ X71 Command and Response Table for SIS Commands Power Receptacle Monitoring and Alarm FunctionsWeb Browser-specific Commands Password and Security Settings Set GMT offset24 View GMT offsetDirectory Commands Below Telnet text responses Ethernet control interface SpecificationsReference Material AC control interfaceAlarm relay control GeneralPart Numbers and Accessories Mounting the IPL T PCS4 InterfaceRack mounting procedure Mounting the IPL T PCS4 on a Rack ShelfUnder-desk Mounting Mounting the IPL T PCS4 under FurnitureGlossary 10/100Base-TDriver Power level reference threshold Subnet Asia Middle East USA, Canada, South America Japan Central AmericaEurope, Africa, and the Middle China East Europe

Related manuals

Manual 2 pages 35.37 Kb