Extron electronic IPL T PCS4i manual Using the Embedded Web Pages, Password Prompt Window

Page 27

4.IP, gateway, and subnet mask addresses follow standard naming and numbering conventions and protocol (nnn.nnn.nnn.nnn). The IP network administrator should provide the addresses to be used with this interface.

Enter the new IP address assigned for the PCS4, the corresponding subnet mask, and gateway address, then click Submit.

The PCS4 takes approximately 2 minutes to store the new settings. After the IP address is changed, your computer loses communication with the PCS4 and a screen appears, indicating that the page cannot be displayed.

5.Close the browser.

6.After changing the PCS4 IP settings, change your computer TCP/IP settings back to their original configuration, and reboot if necessary. You are now able to access the PCS4 web pages to configure the front panel.

Using the Embedded Web Pages

The PCS4 features an embedded web server, which includes factory set web pages. These pages can be replaced with user-designed files, but the default web pages provide many basic features for monitoring, configuring, and controlling the PCS4 via a web browser. This section provides an overview of the embedded web pages.

To access the embedded web pages:

1.Launch a web browser (for example, Internet Explorer®) on your connected computer.

2.On the browser Address line, enter the PCS4 IP address. If a password has been set, the

Enter Network Password dialog box opens.

If no password has been set, the PCS4 web page opens, displaying the System Status page. Skip steps 3 and 4.

3.In the User Name field on the password window, enter text of your choice, or leave the User Name field blank.

Figure 12. Password Prompt Window

4.Enter the administrator password in the Password field, and click OK. The PCS4 web page is displayed.

NOTES: • Passwords must contain 4 to 12 alphanumeric characters. Symbols and

spaces are not allowed, and the passwords are case sensitive.

• Administrators have access to all of the web pages and are able to make changes to settings. Users can access only the System Status page.

IPL T PCS4 • HTML Configuration and Control 21

Image 27

Contents IPL T PCS4i IPL T PCS4Safety Instructions English FCC Class a Notice Software Commands Conventions Used in this GuideNotifications Contents IPL T PCS4 Contents About the IPL T PCS4 FeaturesIntroduction About this GuideIPL T PCS4 Application DiagramsConnection Diagram for IPL T PCS4i Installation Overview Installation Rear PanelsIPL T PCS4i Rear Panel 220 VAC Rear PanelsLAN Port Cabling Setting Up the LAN PortConnecting the Devices Configuring the LAN PortIPL T PCS4 Installation and Rear Panel Front Panel Features Front Panel Features OperationSetting Up the System Using the Front Panel Setting Up Power ControlSetting Power Level Reference Thresholds Setting the Full power threshold If the receptacle Is set to Power level Receptacle Full None and Not Set thresholdsStandby Clearing thresholds Front panel Security Lockout Executive ModeLED lit Group Red power LED lit Group Grouping ReceptaclesResult Resetting the UnitMode ActivationHold the Reset button in until the Power LED blinks once Configuration Control Configuring the HardwareSetting Up the Computer Using ARP ARP-S Command Screen Screen Showing the Ping Command Setting Up the Computer Using a Web BrowserSetting up the computer for IP communication Subnet mask Default gateway Blank or Example of a Default System Settings Configuring the IPL T PCS4 using a web browserPassword Prompt Window Using the Embedded Web PagesSystem Status Web Viewing the System StatusConfiguration Specifying system settingsIP settings Date and time settings Assigning passwords To assign passwordsRemoving passwords Mail Alerts Screen Upper Portion Entering e-mail addresses for alertsManaging receptacles Upgrading firmwareGrouping receptacles Switching power to receptacles on and offMonitoring Settings section Monitoring the receptacles and setting the alarmAlarm Relay Settings section Scheduling an individual receptacle Scheduling power to receptaclesAll receptacles on and off Scheduling receptacles by day of the weekFile Management One receptacle, power on or offUploading files to the web Adding a directoryOther file management functions Custom Web Pages Server Side Includes SSIsQuery Strings Code example Example of a Query String CommandBrowser View of Previous Html Source Code URL EncodingReserved characters Unsafe charactersCharacters Hex Dec Device Power Control Accessing and Using Telnet PortCustom Web Pages Power Connections TroubleshootingNetwork Connections Successful Ping Command ResponseDownloading Global Configurator Software SIS Programming Control Host-to-Interface CommunicationMessages Initiated by the IPL T PCS4 Password Information Error ResponsesError Response References Telnet Web Browser Using the Command and Response TableExample Symbol DefinitionsX5@ X71 Power Receptacle Monitoring and Alarm Functions Command and Response Table for SIS CommandsWeb Browser-specific Commands Set GMT offset24 View GMT offset Password and Security SettingsDirectory Commands Below Telnet text responses AC control interface SpecificationsReference Material Ethernet control interfaceGeneral Alarm relay controlMounting the IPL T PCS4 Interface Part Numbers and AccessoriesMounting the IPL T PCS4 on a Rack Shelf Rack mounting procedureMounting the IPL T PCS4 under Furniture Under-desk Mounting10/100Base-T GlossaryDriver Power level reference threshold Subnet Europe USA, Canada, South America Japan Central AmericaEurope, Africa, and the Middle China East Asia Middle East

Related manuals

Manual 2 pages 35.37 Kb