Extron electronic IPL T PCS4i manual Under-desk Mounting, Mounting the IPL T PCS4 under Furniture

Under-desk Mounting

The PCS4 can also be mounted under furniture, such as a table or podium surface, using the optional under-desk mounting brackets (part number 70-077-01).

M

ALAR

						10A	MAX
					LOAD
				TAL
				TO
10A			-240	V
		00
200-240V	2
Hz
50/60

Figure 38. Mounting the IPL T PCS4 under Furniture

1.If rubber feet were previously installed on the bottom of the unit, remove them.

2.Attach the mounting brackets to the unit with the provided machine screws.

3.Insert #8 wood screws into the four pilot holes. Tighten each screw into the mounting surface until slightly less than ¼ inch of the screw protrudes.

4.Align the mounting screws with the slots in the brackets, and place the PCS4 against the surface with the screws through the bracket slots.

5.Slide the unit slightly forward or back, then tighten all four screws to secure it in place.

IPL T PCS4 • Reference Material 58