Acroprint ES1000 Set the 11 Duration in minutes, Break #1, Set the 12 Start time of Break #2

Page 40

PM

FUNCTION

PM

FUNCTION

Minute

SCHEDULE

SET

SCHEDULE

SET

13 In this case, push the [+] or [-] button to set at "00". And then, push the [SET] button. At that moment, the display will change from flashing to steady.

Set the " 11 Duration in minutes, Break #1".

Program No.

SCHEDULE

FUNCTION				SET

Minute

SCHEDULE

SET

SCHEDULE

SET

14 Push the [SET] button again and select "11" by pressing the [+] or [-] button. Once you push the [SET] button, flashing of the display will change to "Minute". In case of the example, push the [+] or [-] button to set at "60" and push the [SET] button. At that moment, the display will change from flashing to steady.

Range of values: 1-99 min.

("" makes the function disabled.)

Set the " 12 Start time of Break #2".

Program No.

Hour

Minute

SCHEDULE

PM

FUNCTION				SET

15 Make settings for the "Start time of break #2" in the same manner as for the "Start time of break #1", as illustrated in the figure on the left.

34

Image 40

Contents Page ALL Rights Reserved Acroprint Time Recorder Precautions SignsPage Table of Contents Printing Hours Summary Introduction and Features of the ES1000 Unpacking the ES1000 Getting StartedOverview Installing the Ribbon Cassette Precautions to take when replacing the ribbon Where to Install the ES1000 Wall Mounting the ES1000Overview of Operation What You Can Do With the ES1000 Schedule Time Zone RuleStart and End Time for Irregular Red Printing Regular Hours and OvertimeExample Pay Period Weekly, Total regular hours 40 hours/week Round and Grace Time for Start and End Time Settings Preparation for SettingOver View of Function Buttons Setting the Hour Display Format AM/PMSetting the Time Setting the Date Setting Pay Period and Pay Period Ending Date MonthlyWeekly Bi-Weekly Semi-Monthly Setting the Day Advance Time Selecting the Print Format Hours AM/PMEnabling Override and Transfer Functions TransferSelecting Rounding Rules TypeFunction SET Schedule Setting Calculation Rules Setting the Schedule Free Zone or Open Shift easy and most popularSet the 16 Threshold hours for auto break deduction Set the 17 Duration of break time Set the 18 Threshold hours of overtime calculationSet the 19 Limit hours for the OUT punch Program number Day of the week Ribbon Color Change Set the 02 Start time for irregular printing black redSet the 03 End time for irregular printing red black Set the 10 Start time of Break #1Set the 11 Duration in minutes, Break #1 Set the 12 Start time of Break #2Set the 13 Duration in minutes, Break #2 Set the 17 Duration of break time Overtime Calculation Daily Regular HoursFunction SET Total Regular Hours per Week Date Hour Combination of Daily Regular Hours and Total Regular Hours Round and Grace Time for Start/End Time ST/ET Set the 07 Duration of grace time start & end shift times Set the 08 Red printing for grace time period Setting the Weekly Program for External Time Signal Set the program NoPush the + or button to set 00. Then, push the SET button Changing the Weekly Program Confirming the Weekly ProgramDeleting the Weekly Program Setting D. S.T Setting the Auto Daylight Saving ChangeS.T. execution time Set the starting date Set the ending date Deleting the Daylight Saving Time Settings Setting the Language Change the first two digits Setting the PasswordChange the last two digits How to Change Settings When the Password Is Set Canceling the Password Date Colon Printing Hours Summary For Closed CardsPrinting List of Active Card Numbers Printing List of Program Settings Additional Features Override PrintingCard Transfer Employees OperationSupervisors Operation Card Resetting All Cards ResettingResetting Installing the Optional Battery Backup Connecting External Signal Control Also make sure to secure wires with the wire clampPage Troubleshooting Error No. appearsSpecifications CR2450THCQ0170-6120-1 06-0331-000 Rev. a