Acroprint ES1000 user manual Round and Grace Time for Start/End Time ST/ET

Round and Grace Time for Start/End Time (ST/ET)

	Start time				End time
		(ST)			(ET)
06	Duration of	07	Duration of	07	Duration of	06	Duration of
	round time		grace time		grace time		round time
	for ST		for ST		for ET		for ET
	15	5			20	30
	min.	min.			min.	min.
Round forward		Grace back			Grace forward	Round back
time zone		time zone			time zone	time zone

Push the [SETTING START/END] button before you start setting. At that moment,

" " is indicated on a display and you go into setting mode.

Set the " 06 Duration of round time (start & end shift times)".

Program No.

FUNCTION

SCHEDULE

SET

1 Push the [FUNCTION] button for 2 seconds.

2 Once a number on the display starts flashing, position the "" mark next to the "SCHEDULE" mark by pressing the [FUNCTION] button.

A flashing number can be changed.

Round time for ST

SCHEDULE

FUNCTION SET

Round time for ET

SCHEDULE

FUNCTION SET

3 Push the [+] or [-] button to set the left-side number at "06" and push the [SET] button. At that moment, flashing of the display will change to the middle numbers which indicate round-forward period (min.) for IN punch before the start time. In case of the example, push the [+] or [-] button to set at "15" and push the [SET] button. At that moment, flashing of the display will change to the right-side numbers.

Range of values: 1-99 min.

(""makes the function disabled.)

42