Acroprint ES1000 user manual Confirming the Weekly Program, Changing the Weekly Program

Confirming the Weekly Program

Refer to the Step 1 and 2 in the previous setting section. Every time you push the [+] button, the program number changes (010203 ...) and you can confirm each setting.

After confirming the settings, push the [SETTING START/END] button to get out of setting mode. Make sure "date" and "time" are indicated on the display and the colon is flashing. Then replace the cover and lock.

Changing the Weekly Program

Refer to the Step 1 and 2 in the previous setting section and select the program number, which you want to change settings. Once the desired program number starts flashing, push the [SET] button and change settings in the same manner as you originally set.

Deleting the Weekly Program

Refer to the Step 1 and 2 in the previous setting section and select the program No., which you want to delete settings. Once the desired program No. starts flashing, push the [SET] button and delete the " " mark over the selected duration by pressing the [-] button. Then, push the [SET] button. At that moment, the display will change as illustrated in the following figure and now settings are deleted.

FUNCTION

WEEKLY

PROGRAM

FOR EXT.

SIGNAL

SET

Push the [SETTING START/END] button to get out of setting mode. Make sure "date" and "time" are indicated on the display and the colon is flashing. Then replace the cover and lock.

Date

AM

Colon

47