Ricoh G413 operating instructions VRS Getting Started Guide

Page 16

VRS Getting Started Guide

6.If Calibration is successful, the display windows will be visible as in the example to the right.

7.Select Source, Scanner from the pull-down menu in preparation for an ADF scan.

8.A Window will display stating that the source is already in use, click on Yes to change.

9.Select Ricoh VirtualReScan Source, then click on OK.

12	Kofax Image Products

Image 16

Contents Ricoh Copyright Contents VRS Getting Started Guide Introduction Product OverviewSystem Requirements VRS Product PackageScanner Install the Software InstallationTo install the VRS software Setup Complete Dialog Box Precautions Install the Adrenaline Hardware AcceleratorCompatibility with Current Accelerators and Engines Configure the Accelerator Windows Connect PC to ScannerConfigure the Accelerator Windows NT Kofax Configuration Manager KCM Dialog BoxAttach Your Scanner To connect the scanner to your PCStarting VirtualReScan To start VRSFirst Time Calibration Opening the VRS MenuTo open the VRS menu Select Source, Properties VRS Getting Started Guide Configure ResetPreview ProfileDefining Exception Conditions CauseSelecting the Threshold Brightness Out of Range ThresholdContrast Out of Range Threshold Missing Corner ThresholdErrors Tab Selecting an ActionError Description Action OptionsTo define exception condition parameters Action Type DescriptionRescan manual mode only VRS manual mode onlyIgnore manual mode only Auto Resolve check boxSelecting a Mode Stop on ErrorsStop Every Stop on FirstUpdating Image Properties VRS Viewer with the VRS Interactive Properties Dialog BoxUsing the Zoom Menu to adjust the view Using the VRS ViewerUsing mouse buttons to adjust the view Using the VRS Interactive Properties Dialog Box VRS Interactive Properties Dialog Box TabsVRS Interactive Properties Dialog Box Buttons Using the Clarity Tab Brightness and ContrastBrightness and Contrast Visual Markers Black LinesTo change the Clarity settings Blue RectangleDotted Red Lines GammaUsing the Noise Tab To change the Noise settingsVRS Getting Started Guide Using the Skew Tab Skew TabTo change the Skew tab settings Using the Profiles Tab To set up a profileTo change the active profile To remove a profile from the Available Profiles listAutomatic Deskew Using the Options TabImage Crop Intelligent Contrast Adjustment / Brightness Adjustment Accelerated ScanningVRS Refresh To change the selections on the Options tabUsing the Analysis Tab Analysis TabUsing the About Tab About TabPreviewing Images To preview an imageResetting VRS To reset the VRS configurationTechnical Support Headquarters European HeadquartersPage Index Kofax Image Products VRS Getting Started Guide