Ricoh G413 operating instructions Using the Profiles Tab, To set up a profile

Page 35

VRS Getting Started Guide

Using the Profiles Tab

The Profiles tab helps you set up and manage VRS image property profiles. Each profile is a user- defined combination of settings for the Clarity, Noise, and Options tabs. You can establish multiple profiles to accommodate different scanning situations, so that you don’t have to repeat the process of defining image properties.

VRS uses the profile Default settings, unless you define and select another one. From the Profiles tab, you can define, update, load, and remove profiles.

Figure 22. Profiles Tab

!To set up a profile

1Open the VRS Interactive Properties dialog box and make selections from the Clarity, Noise, and Options tabs.

2Select the Profiles tab.

3In the New Profile text box, assign a name to the new profile. Be sure to assign a profile name with alphanumeric characters.

4Select Save As. The new profile name appears in the Available Profiles list, and it becomes the active profile.

Kofax Image Products

31

Image 35

Contents Ricoh Copyright Contents VRS Getting Started Guide Product Overview IntroductionScanner VRS Product PackageSystem Requirements To install the VRS software InstallationInstall the Software Setup Complete Dialog Box Compatibility with Current Accelerators and Engines Install the Adrenaline Hardware AcceleratorPrecautions Connect PC to Scanner Configure the Accelerator WindowsKofax Configuration Manager KCM Dialog Box Configure the Accelerator Windows NTTo connect the scanner to your PC Attach Your ScannerTo start VRS Starting VirtualReScanTo open the VRS menu Opening the VRS MenuFirst Time Calibration Select Source, Properties VRS Getting Started Guide Profile ConfigureReset PreviewCause Defining Exception ConditionsMissing Corner Threshold Selecting the ThresholdBrightness Out of Range Threshold Contrast Out of Range ThresholdSelecting an Action Errors TabAction Options Error DescriptionAction Type Description To define exception condition parametersAuto Resolve check box Rescan manual mode onlyVRS manual mode only Ignore manual mode onlyStop on First Selecting a ModeStop on Errors Stop EveryVRS Viewer with the VRS Interactive Properties Dialog Box Updating Image PropertiesUsing mouse buttons to adjust the view Using the VRS ViewerUsing the Zoom Menu to adjust the view VRS Interactive Properties Dialog Box Tabs Using the VRS Interactive Properties Dialog BoxVRS Interactive Properties Dialog Box Buttons Black Lines Using the Clarity TabBrightness and Contrast Brightness and Contrast Visual MarkersGamma To change the Clarity settingsBlue Rectangle Dotted Red LinesTo change the Noise settings Using the Noise TabVRS Getting Started Guide Skew Tab Using the Skew TabTo change the Skew tab settings To set up a profile Using the Profiles TabTo remove a profile from the Available Profiles list To change the active profileImage Crop Using the Options TabAutomatic Deskew To change the selections on the Options tab Intelligent Contrast Adjustment / Brightness AdjustmentAccelerated Scanning VRS RefreshAnalysis Tab Using the Analysis TabAbout Tab Using the About TabTo preview an image Previewing ImagesTo reset the VRS configuration Resetting VRSHeadquarters European Headquarters Technical SupportPage Index Kofax Image Products VRS Getting Started Guide