Ricoh G413 operating instructions Starting VirtualReScan, To start VRS

Page 13

VRS Getting Started Guide

Starting VirtualReScan

Once the installation is complete, activate VRS by selecting the VirtualReScan Source from your scanning application. Once you select the source, the VRS icon appears on the Windows taskbar to signal that VRS is active.

Note: During the VRS installation process, the VirtualReScan Source is automatically created and set as the default scanning source. If you have questions about how to select the source from your scanning application, consult with your system administrator.

!To start VRS

1 Power on your scanner.

2 Start your scanning application and select the VirtualReScan Source.

3 The VRS icon appears on your Windows taskbar, similar to Figure 9.

Figure 9. VRS Icon

Kofax Image Products

9

Image 13

Contents Ricoh Copyright Contents VRS Getting Started Guide Product Overview IntroductionSystem Requirements VRS Product PackageScanner Install the Software InstallationTo install the VRS software Setup Complete Dialog Box Precautions Install the Adrenaline Hardware AcceleratorCompatibility with Current Accelerators and Engines Connect PC to Scanner Configure the Accelerator WindowsKofax Configuration Manager KCM Dialog Box Configure the Accelerator Windows NTTo connect the scanner to your PC Attach Your ScannerTo start VRS Starting VirtualReScanFirst Time Calibration Opening the VRS MenuTo open the VRS menu Select Source, Properties VRS Getting Started Guide Reset ConfigurePreview ProfileCause Defining Exception ConditionsBrightness Out of Range Threshold Selecting the ThresholdContrast Out of Range Threshold Missing Corner ThresholdSelecting an Action Errors TabAction Options Error DescriptionAction Type Description To define exception condition parametersVRS manual mode only Rescan manual mode onlyIgnore manual mode only Auto Resolve check boxStop on Errors Selecting a ModeStop Every Stop on FirstVRS Viewer with the VRS Interactive Properties Dialog Box Updating Image PropertiesUsing the Zoom Menu to adjust the view Using the VRS ViewerUsing mouse buttons to adjust the view VRS Interactive Properties Dialog Box Tabs Using the VRS Interactive Properties Dialog BoxVRS Interactive Properties Dialog Box Buttons Brightness and Contrast Using the Clarity TabBrightness and Contrast Visual Markers Black LinesBlue Rectangle To change the Clarity settingsDotted Red Lines GammaTo change the Noise settings Using the Noise TabVRS Getting Started Guide Skew Tab Using the Skew TabTo change the Skew tab settings To set up a profile Using the Profiles TabTo remove a profile from the Available Profiles list To change the active profileAutomatic Deskew Using the Options TabImage Crop Accelerated Scanning Intelligent Contrast Adjustment / Brightness AdjustmentVRS Refresh To change the selections on the Options tabAnalysis Tab Using the Analysis TabAbout Tab Using the About TabTo preview an image Previewing ImagesTo reset the VRS configuration Resetting VRSHeadquarters European Headquarters Technical SupportPage Index Kofax Image Products VRS Getting Started Guide