Ricoh G413 operating instructions Install the Adrenaline Hardware Accelerator, Precautions

Page 9

VRS Getting Started Guide

Step 2. Install the Adrenaline Hardware Accelerator

This section explains how to install the Adrenaline Hardware Accelerator.

Note: To run VirtualReScan successfully, you need to install only the software provided on the VRS installation CD. Do not install the software provided on the Adrenaline Hardware Accelerator CD.

Compatibility with Current Accelerators and Engines

We recommend that you install the Adrenaline Hardware Accelerator on a PC with no other Kofax hardware accelerators. If necessary, remove the older Kofax accelerators before you install the Adrenaline Hardware Accelerator.

Precautions

When handling your Adrenaline Hardware Accelerator, follow these precautions:

•Keep the accelerator in its original shipping package until you are ready to install it.

•Power off your PC before installing the accelerator.

•Before handling the accelerator, discharge static electricity from yourself and the work area by touching the metal chassis of the PC.

•Hold the accelerator by the edges; do not touch its metal surface.

Before installing the accelerator, make sure your PC is powered off. Then, install the accelerator in any available PCI slot. Be sure to use the screws to secure it into place.

Figure 5. Installing an Adrenaline Hardware Accelerator in Your PC

Kofax Image Products

5

Image 9

Contents Ricoh Copyright Contents VRS Getting Started Guide Product Overview IntroductionVRS Product Package System RequirementsScanner Installation Install the SoftwareTo install the VRS software Setup Complete Dialog Box Install the Adrenaline Hardware Accelerator PrecautionsCompatibility with Current Accelerators and Engines Connect PC to Scanner Configure the Accelerator WindowsKofax Configuration Manager KCM Dialog Box Configure the Accelerator Windows NTTo connect the scanner to your PC Attach Your ScannerTo start VRS Starting VirtualReScanOpening the VRS Menu First Time CalibrationTo open the VRS menu Select Source, Properties VRS Getting Started Guide Reset ConfigurePreview ProfileCause Defining Exception ConditionsBrightness Out of Range Threshold Selecting the ThresholdContrast Out of Range Threshold Missing Corner ThresholdSelecting an Action Errors TabAction Options Error DescriptionAction Type Description To define exception condition parametersVRS manual mode only Rescan manual mode onlyIgnore manual mode only Auto Resolve check boxStop on Errors Selecting a ModeStop Every Stop on FirstVRS Viewer with the VRS Interactive Properties Dialog Box Updating Image PropertiesUsing the VRS Viewer Using the Zoom Menu to adjust the viewUsing mouse buttons to adjust the view VRS Interactive Properties Dialog Box Tabs Using the VRS Interactive Properties Dialog BoxVRS Interactive Properties Dialog Box Buttons Brightness and Contrast Using the Clarity TabBrightness and Contrast Visual Markers Black LinesBlue Rectangle To change the Clarity settingsDotted Red Lines GammaTo change the Noise settings Using the Noise TabVRS Getting Started Guide Skew Tab Using the Skew TabTo change the Skew tab settings To set up a profile Using the Profiles TabTo remove a profile from the Available Profiles list To change the active profileUsing the Options Tab Automatic DeskewImage Crop Accelerated Scanning Intelligent Contrast Adjustment / Brightness AdjustmentVRS Refresh To change the selections on the Options tabAnalysis Tab Using the Analysis TabAbout Tab Using the About TabTo preview an image Previewing ImagesTo reset the VRS configuration Resetting VRSHeadquarters European Headquarters Technical SupportPage Index Kofax Image Products VRS Getting Started Guide