Ricoh G413 operating instructions Action Options, Error Description

Page 21

VRS Getting Started Guide

Table 2. Error Types

Error

Description

 

 

Paper Jam

Paper jam occurs in the scanner paper path.

 

 

Out of Paper*

No paper is available to scan.

 

 

Cover Open

Scanner cover is not closed securely.

 

 

No Power

Power is off, or power cable connection is loose.

 

 

Cable Disconnect

Scanner cable is not attached properly to the scanner or to the

 

Adrenaline Hardware Accelerator in the PC.

 

 

Communication

Communication conflict exists between the scanner and the PC.

 

 

Timeout

Scanner is unable to respond within the predefined period of time.

 

 

Auto Crop Failure

Due to excessive skew or other condition, VRS is unable to detect the

 

edges of the scanned document.

 

 

*With some ISIS scanning applications, VRS does not generate an error for an out of paper condition.

Action Options

Use the Action box to define how you want VRS to handle each exception condition listed on the Warnings tab and the Errors tab. To define an exception action type, click in the Action box on the Warnings tab or the Errors tab, and select from the drop-down list. The action options vary, according to the type of warning or error.

Action Drop-Down List

Figure 13. Action Drop-Down List

Kofax Image Products

17

Image 21
Contents Ricoh Copyright Contents VRS Getting Started Guide Product Overview IntroductionVRS Product Package System RequirementsScanner Installation Install the SoftwareTo install the VRS software Setup Complete Dialog Box Install the Adrenaline Hardware Accelerator PrecautionsCompatibility with Current Accelerators and Engines Connect PC to Scanner Configure the Accelerator WindowsKofax Configuration Manager KCM Dialog Box Configure the Accelerator Windows NTTo connect the scanner to your PC Attach Your ScannerTo start VRS Starting VirtualReScanOpening the VRS Menu First Time CalibrationTo open the VRS menu Select Source, Properties VRS Getting Started Guide Reset ConfigurePreview ProfileCause Defining Exception ConditionsBrightness Out of Range Threshold Selecting the ThresholdContrast Out of Range Threshold Missing Corner ThresholdSelecting an Action Errors TabAction Options Error DescriptionAction Type Description To define exception condition parametersVRS manual mode only Rescan manual mode onlyIgnore manual mode only Auto Resolve check boxStop on Errors Selecting a ModeStop Every Stop on FirstVRS Viewer with the VRS Interactive Properties Dialog Box Updating Image PropertiesUsing the VRS Viewer Using the Zoom Menu to adjust the viewUsing mouse buttons to adjust the view VRS Interactive Properties Dialog Box Tabs Using the VRS Interactive Properties Dialog BoxVRS Interactive Properties Dialog Box Buttons Brightness and Contrast Using the Clarity TabBrightness and Contrast Visual Markers Black LinesBlue Rectangle To change the Clarity settingsDotted Red Lines GammaTo change the Noise settings Using the Noise TabVRS Getting Started Guide Skew Tab Using the Skew TabTo change the Skew tab settings To set up a profile Using the Profiles TabTo remove a profile from the Available Profiles list To change the active profileUsing the Options Tab Automatic DeskewImage Crop Accelerated Scanning Intelligent Contrast Adjustment / Brightness AdjustmentVRS Refresh To change the selections on the Options tabAnalysis Tab Using the Analysis TabAbout Tab Using the About TabTo preview an image Previewing ImagesTo reset the VRS configuration Resetting VRSHeadquarters European Headquarters Technical SupportPage Index Kofax Image Products VRS Getting Started Guide